Harda DTL 16
Built: 1999-1999 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Harda – other models: the collective page of trailers from light single-axle units to heavy semi-trailers outside the named ranges, types D, DS, DT and DZ, 1,100 to 47,000 kg gross weight
This page gathers the Harda trailers the register could not assign to a named range – from light single-axle units to heavy semi-trailers. The type designations combine a code for the body and axle configuration (D, DS, DT, DZ, DE, DO) with a figure for the weight or size class, such as DS 27, DT 35 or DZE 35. The light D and DT types fall into trailer category O1 or O2 with an overrun brake, while the heavy DZ and DS versions at the top of the weight range fall into category O4 with their own air braking system and ABS.
Read on 3 more paragraphs
The register lists here 85 versions with unladen weights of 220 to 14,820 kg, gross weights of 1,100 to 47,000 kg, lengths of 3,430 to 13,900 mm and widths of 1,330 to 2,750 mm.
The span from light car trailers to heavy-duty semi-trailers shows a manufacturer range stretching from the private transport trailer to the commercial long-haul semi-trailer, competing with specialist suppliers in both segments. Such a broad range is not unusual among Central European trailer makers, who carry a continuous line-up from the simple construction-site trailer to the long-haul semi-trailer.
On a used example, check the axle, coupling and lights on the light models, and on the heavy semi-trailers also the frame, braking system (ABS/EBS), kingpin and landing legs, plus tyre condition; parts availability depends heavily on the market concerned.
Technical data
Dimensions and weights
| Length | 6,550 mmcorrect |
|---|---|
| Width | 2,750 mmcorrect |
| Wheelbase | 1,300 mmcorrect |
| Unladen weight | 3,720 kgcorrect |
| Gross vehicle weight | 16,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Harda DTL 16 weigh?
The unladen weight is 3,720 kg.
What is the gross vehicle weight of the Harda DTL 16?
16,000 kg.
Up to what speed is the Harda DTL 16 approved?
Approved up to 100 km/h.
What are the dimensions of the Harda DTL 16?
6,550 mm × 2,750 mm.
When was the Harda DTL 16 built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.