Happy Trailer CS 45
Built: 2000-2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Happy Trailer – further models: Nordic collector page of heavy semi-trailers and single-axle trailers outside the main series, 2.25 to 19.9 t kerb weight, 12 to 47 t gross combination weight
Happy Trailer builds heavy trailers and semi-trailers for the Nordic market; model names such as "Stålsemi" (Swedish for steel semi-trailer) point to a sales area spanning Sweden and Finland. This page gathers Happy Trailer models outside the named series, from simple centre-axle trailers to three-axle semi-trailers with tipping, flatbed or enclosed-box bodies.
Read on 3 more paragraphs
The register lists 63 versions with kerb weights from 2,250 to 19,900 kg and a gross combination weight from 12,000 to 47,000 kg. Lengths range from 5.10 to 14.02 m and widths from 2.40 to 2.60 m – typical dimensions for three-axle semi-trailers and heavy centre-axle trailers used in heavy haulage and construction traffic.
Such trailers carry construction machinery, bulk materials, timber and steel products across Scandinavia. Three-axle versions with air suspension and drum or disc brakes dominate heavy haulage, supplemented by steered rear axles for tighter access on building sites; they compete with other Nordic makers of low-loaders and tipping semi-trailers built for the high combination weights permitted there.
When buying used, check the frame and welds (cracking from sustained loads), axles, brakes, suspension air bags and brake discs or drums, the fifth wheel or drawbar coupling with its tow eye, and, on tipping versions, the hydraulic rams and side panels; a look underneath the body quickly reveals corroded cross-members. Axle-assembly spares are available through the usual European commercial-vehicle suppliers.
Sources: Kennwerte der Modelle Happy Trailer (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,920 mmcorrect |
|---|---|
| Width | 2,540 mmcorrect |
| Wheelbase | 9,000 mmcorrect |
| Unladen weight | 6,920 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Happy Trailer CS 45 weigh?
The unladen weight is 6,920 kg.
What is the gross vehicle weight of the Happy Trailer CS 45?
39,000 kg.
Up to what speed is the Happy Trailer CS 45 approved?
Approved up to 100 km/h.
What are the dimensions of the Happy Trailer CS 45?
13,920 mm × 2,540 mm.
When was the Happy Trailer CS 45 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
0NCR 39-327 A
0NCRS 32-220 A
0NCZ 42-327 A
0RTT 25
A2-218A
ARP 18-109
ARP 20/110
ARP 28-128
ARP 28/218
ARPU 28-218
ART 18-109
ART 42-324
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.