Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsHanomag › R35

Hanomag R35

Series: Other models

prospektsammlung:http://www.hanomagtractors.com/tractorbrochures/Hanomag/1953-1957/5357-21.jpg

The Hanomag R35 is a tractor from Hanomag. The engine is rated at 26 kW.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 8.9 to 63 kW; with 26 kW, the R35 sits in the mid-field. Directly alongside are the Perfekt 401 with 24 kW below and the 36/40 Industrial with 27 kW above.

Hanomag – other models: collective page of German tractors outside the named ranges, from the R types through Granit, Brillant and Perfekt to the articulated Combitrac, 8.8 to 63 kW

This page gathers the Hanomag tractors the register could not assign to a named range, from the early pre-war R types to the post-war Granit, Brillant, Perfekt and Robust ranges and the articulated Combitrac models. Hanomag, the Hannoversche Maschinenbau AG, sold its farm-equipment division to Massey-Ferguson in 1971 and ended tractor production afterwards. The R types such as the R16, R22 or R40 carry roughly their power in hp in the number, while Combitrac models such as the C218 and R440 Combitrac are articulated four-wheel-drive tractors for use in vineyards and orchards.

Read on 3 more paragraphs

The register lists here 56 versions with 8.8 to 63 kW from one- to six-cylinder engines of 511 to 5,702 cm³, unladen weights of 800 to 3,750 kg, lengths of 2,340 to 3,990 mm, widths of 1,480 to 2,110 mm and heights of 1,450 to 2,390 mm; torque ranges from 117 to 265 Nm at rated speeds of 1,100 to 2,600 rpm. Most models run on diesel, a few early types on crude oil, and the R40 Holzgas on a wartime wood-gas unit.

In the 1950s and 1960s Hanomag was among the significant German tractor makers alongside Fendt, Deutz and Eicher, focused on mid-sized yard and field tractors as well as the specialised articulated Combitrac for special crops.

When buying used, on the older R types the cooling system, injection pump and gearbox condition matter, on the Combitrac models additionally the articulation joint and four-wheel-drive bearings; parts are now only found through Hanomag specialists and reproduction-parts makers.

Sources: Kennwerte der Modelle Hanomag (weitere Modelle)

Technical data

Engine

Engine makeHanomagcorrect
Fueldieselcorrect
Power35 hp (26 kW)correct
Rated speed1,900 rpmcorrect
Cylinders4correct
Displacement2,799 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,050 mmcorrect
Width1,580 mmcorrect
Height1,760 mmcorrect
Wheelbase1,850 mmcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect
Gearbox5/1- oder 10/2-Getriebecorrect
Top speed19.2 km/hcorrect

Working data

Fuel tank capacity45 lcorrect

Origin and approval

PlantGermanycorrect

Frequently asked questions

How much power does the Hanomag R35 have?

The Hanomag R35 delivers 35 hp.

What engine does the Hanomag R35 have?

4 cylinders, 2,799 cm³ displacement, Diesel.

How fast does the Hanomag R35 go?

Top speed is 19.2 km/h.

What are the dimensions of the Hanomag R35?

3,050 mm × 1,580 mm × 1,760 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare