Start › Road construction › Hamm › HD14 TT

Hamm HD14 TT

Series: Hamm Pneumatic Roller

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the HD14 TT, Hamm offers a model from the Hamm Pneumatic Roller series. The engine delivers 47 hp (34.6 kW), has 4 cylinders. The engine comes from KUBOTA. Rated speed is 2,700 rpm. The unladen weight is 4,320 kg. The wheelbase measures 1,950.7 mm. Ground clearance is 307.8 mm. Top speed is 10.1 km/h. The tank holds 73.1 litres. The engine fitted is the V2203. The Hamm Pneumatic Roller series covers 16 models. Rated output within it ranges from 47 to 136.1 hp; the HD14 TT sits at the bottom of that range with 47 hp. Its immediate neighbours are the GRW180i-10 above it with 102.4 hp. 150 Hamm models across 3 series are on record. The model is listed under Road construction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine makeKUBOTAcorrect
Engine modelV2203correct
Power47 hp (34.6 kW)correct
Rated speed2,700 rpmcorrect
Cylinders4correct

Dimensions and weights

Length2,896.1correct
Width1,298.4correct
Wheelbase1,950.7correct
Ground clearance307.8correct
Unladen weight4,320 kgcorrect

Drivetrain and chassis

Tyre type80-16correct
Top speed10.1 km/hcorrect

Working data

Fuel tank capacity73.1 lcorrect

Where this model stands

Power-to-weight ratio: 8 kW/t (35 kW / 4.3 t)

Stronger than 21% of the road construction in the register — out of 669 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hamm HD14 TT have?

The Hamm HD14 TT delivers 47 hp.

How much does the Hamm HD14 TT weigh?

The unladen weight is 4,320 kg.

What engine does the Hamm HD14 TT have?

4 cylinders.

How fast does the Hamm HD14 TT go?

Top speed is 10.1 km/h.

What are the dimensions of the Hamm HD14 TT?

2,896 mm × 1,298 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

GRW10

GRW15

GRW18

GRW180i-10

GRW180i-12H

GRW21

GRW24

GRW280-10

GRW280-12

GRW280-12H

GRW280-16

GRW280-20

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare