Start › Excavators & compaction › Halla › HE50A

Halla HE50A

Series: Halla Midi Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Halla Midi Excavator series from Halla includes the HE50A. The engine delivers 41.8 kW, has 4 cylinders, with a displacement of 2,766.1 cm³. Torque is 190.4 Nm. The unladen weight is 4,980 kg. Ground clearance is 347.5 mm. The tank holds 85.2 litres. Maximum torque is reached at 1,600 rpm. The pump delivers 115.1 l/min. The hydraulic tank holds 50.3 litres. Working pressure is 215.7 bar. The cooling system holds 10.2 litres. The oil fill is 10.2 litres. The engine fitted is the 4TNE94. Rated output across the Halla range ranges from 41.8 to 186.1 kW; the HE50A sits at the bottom of that range with 41.8 kW. Its immediate neighbours are the HA170 above it with 94.7 kW. 7 Halla models across 4 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine model4TNE94correct
Power41.8 kWcorrect
Torque190.4correct
Speed at max. torque1,600 rpmcorrect
Cylinders4correct
Displacement2,766.1 cm³correct
AspirationNaturalcorrect
Coolant capacity10.2 lcorrect
Engine oil capacity10.2 lcorrect

Dimensions and weights

Ground clearance347.5correct
Unladen weight4,980 kgcorrect

Working data

Pump flow115.1 l/mincorrect
Hydraulic oil capacity50.3 lcorrect
Hydraulic pressure215.7 barcorrect
Fuel tank capacity85.2 lcorrect

Other data

Height2,542correct

Where this model stands

Power-to-weight ratio: 8.4 kW/t (42 kW / 5 t)

Stronger than 12% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Halla HE50A have?

The Halla HE50A delivers 41.8 kW.

How much does the Halla HE50A weigh?

The unladen weight is 4,980 kg.

What engine does the Halla HE50A have?

4 cylinders, 2,766 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare