Haas A4410
Built: 2016-2016 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Haas A4410 – O4-class trailer with a gross weight of 20,000 kg, 16,920 kg payload, a length of 8.00 m and a 4.40 m wheelbase, built in 2016.
With a gross weight of 20,000 kg, the A4410 falls into EU trailer class O4, the heavy trailers above 10 tonnes used to haul building materials and general cargo behind a tractor unit.
Read on 3 more paragraphs
With an unladen weight of 3,080 kg, payload comes to 16,920 kg, a high share of the gross weight typical of a lightly built chassis with an open load platform. At 8.00 m long, 2.55 m wide and with a 4.40 m wheelbase, the trailer sits on a compact, two-axle chassis that carries the high payload on a short base rather than spreading it over a long frame.
From class O3 upwards, trailers of this size are generally fitted with air brakes rather than the simple overrun brake used on light trailers. Towing it as a combination requires driving licence category C1E or CE in the EU, depending on the combined train weight. The short build combined with a high payload calls for even load distribution across the platform, since axle loads on a short two-axle chassis rise quickly if cargo is bunched at one end.
When buying a used unit, check the frame and load platform closely: deformed main rails from point overloads and corrosion on the cross members and ramp mounts are common weak spots on short, heavily loaded chassis. Check the air lines and reservoir for leaks, listen to the axle bearings for play, inspect the load-lashing points for deformation, and check the ramp hinges and locking pins for wear.
Sources: Kennwerte des Modells Haas A4410, RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 8,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,400 mmcorrect |
| Unladen weight | 3,080 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Haas A4410 weigh?
The unladen weight is 3,080 kg.
What is the gross vehicle weight of the Haas A4410?
20,000 kg.
Up to what speed is the Haas A4410 approved?
Approved up to 100 km/h.
What are the dimensions of the Haas A4410?
8,000 mm × 2,550 mm.
When was the Haas A4410 built?
Production years: 2016.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.