Technical register for agricultural, construction and commercial machinery · sourced data

Grove GMK4075-1

Series: Grove All Terrain Crane

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Grove GMK4075-1 is a model in the Grove All Terrain Crane series. The engine delivers 428.4 hp (315.1 kW), has 6 cylinders, with a displacement of 11,950 cm³. Torque is 2,000.1 Nm. Rated speed is 1,800 rpm. The machine is 12,795 mm long and 2,750 mm wide. The unladen weight is 40,990 kg. The gross vehicle weight is 54,300 kg. The gearbox has 12 forward gears. There are also 2 reverse gears. Maximum torque is reached at 1,080 rpm. The electrical system runs on 24 V. Tyre size: 14,00 R25. The gearbox offers 12 gears. The Grove All Terrain Crane series covers 57 models. Rated output within it ranges from 149.6 to 609.1 hp; the GMK4075-1 sits in the upper part of that range with 428.4 hp. Its immediate neighbours are the GMK4100B below it with 408 hp and the AT9120 above it with 435.2 hp. Unladen weight within it ranges from 10,500 to 91,327.6 kg; here the GMK4075-1 sits in the lower part of that range with 40,990 kg. 364 Grove models across 11 series are on record.

Grove AT865, AT1100: the number after AT marks the tonnage class

On Grove all-terrain cranes, AT stands for "All Terrain", and the number that follows roughly indicates the capacity class in US tons. Factory data puts the AT865's maximum lift capacity at 130,000 lb, just under 59 tonnes, while the AT1100 reaches 220,000 lb, roughly 100 tonnes — the model number sits noticeably above the actual maximum load because it marks the broad market class rather than the exact figure from the load chart.

Read on 3 more paragraphs

The "Grove All Terrain Crane" bucket spans smaller classics like the AT400, mid-range models such as the AT422E, AT635E and AT745, up to the large AT865, AT880 and AT1100. Letter suffixes such as E or S generally mark updated variants within a given tonnage class, though the available sources do not support a single, consistent meaning for these letters across every class.

The register's 57 active models span an operating weight of 10,500 to 91,327 kg, engine power from 110 to 447 kW, 6- to 10-cylinder engines, and displacement from 5701 to 16,000 cm³ — a wide technical spread between compact site cranes and heavy-lift machines.

Buying used, what matters most on all-terrain cranes is the condition of the telescopic boom and its slide pads, along with the load-test history. Checking the supplied load chart shows whether the real capacity at a given boom angle still matches the factory figures.

Sources: SpecCodex register, model data: Grove All Terrain Crane, RitchieSpecs: Grove AT865 All Terrain Crane, RitchieSpecs: Grove AT1100 All Terrain Crane

Technical data

Engine

Power428.4 hp (315.1 kW)correct
Rated speed1,800 rpmcorrect
Torque2,000.1 Nmcorrect
Speed at max. torque1,080 rpmcorrect
Cylinders6correct
Displacement11,950 cm³correct

Dimensions and weights

Length12,795 mmcorrect
Width2,750 mmcorrect
Unladen weight40,990 kgcorrect
Gross vehicle weight54,300 kgcorrect

Drivetrain and chassis

Gearbox typeZF-AS TRONIC automatic gearboxcorrect
Gears12correct
Forward gears12correct
Reverse gears2correct
Tyre size14.00 R25correct

Other data

System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 7.7 kW/t (315 kW / 41 t)

Stronger than 70% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Grove GMK4075-1 have?

The Grove GMK4075-1 delivers 428 hp.

How much does the Grove GMK4075-1 weigh?

The unladen weight is 40,990 kg.

What is the gross vehicle weight of the Grove GMK4075-1?

54,300 kg.

What engine does the Grove GMK4075-1 have?

6 cylinders, 11,950 cm³ displacement.

What are the dimensions of the Grove GMK4075-1?

12,795 mm × 2,750 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare