GMC PICK UP 932
Built: 1959-1959 · Series: UP
More machines from model year 1959
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
GMC Pick-up: the collection page for the classic GMC flatbed trucks, half-ton class and Hydra-Matic automatic, six- and eight-cylinder engines
This collection page holds the register's classic pick-up models from GMC, General Motors' commercial vehicle brand, which has built trucks and pick-ups since the 1910s on shared engineering with Chevrolet while remaining a separate marque. Designations such as "1/2 Ton" and the three-digit number 100 denote the payload class, "4X4" four-wheel drive, "Hydra-Matic" GM's early 1950s automatic transmission technology, and "Step Side" the narrow bed with external fenders as opposed to the smooth Fleetside bed; "Silverado" and "Commercial" mark upper and purely utilitarian trim respectively.
Read on 3 more paragraphs
The register lists 17 versions here with 3,540 to 5,180 cm³ displacement from six- and eight-cylinder engines, weights of 1,450 to 2,240 kg, gross vehicle weights of 1,870 to 3,500 kg, a length around 5,300 mm and widths of 1,850 to 2,100 mm.
As the practically identical counterpart to the Chevrolet pick-ups, GMC traditionally served more commercial and municipal buyers, as well as customers who valued a slightly more upmarket positioning; the pick-ups competed with the contemporary Ford F-Series and its Dodge equivalent.
On a used example, rust on the frame, sills and load bed matters most — a well-known weak point of the classic GM full-size pick-ups — along with the condition of the inline-six or V8 and its carburettor on older model years, the drum brakes and the rear leaf springs under load.
Sources: Kennwerte der Modelle GMC Pick-up, GMC (General Motors, Hersteller), RDW (Niederlande)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 1,950 mmcorrect |
|---|---|
| Wheelbase | 3,130 mmcorrect |
| Unladen weight | 1,680 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the GMC PICK UP 932 weigh?
The unladen weight is 1,680 kg.
What is the gross vehicle weight of the GMC PICK UP 932?
3,500 kg.
What engine does the GMC PICK UP 932 have?
6 cylinders.
When was the GMC PICK UP 932 built?
Production years: 1959.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PICK UP 1/2 TON
PICK UP 100
PICK UP 100-8/310
PICK UP 2500
PICK UP 3100
PICK UP 33P
PICK UP 4X4
PICK UP 4X4 CHEVROLET
PICK UP 4X4 SIERRA
PICK UP C 2500
PICK UP COMMERCIAL
PICK UP DIESEL
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.