Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tGinaf › E 3123

Ginaf E 3123

Built: 2020-2020 · Series: Other models

More machines from model year 2020

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The E 3123 comes from Ginaf. Production: 2020. The machine is 8,450 mm long and 2,410 mm wide. The unladen weight is 13,210 kg. The wheelbase measures 4,200 mm. Top speed is 83 km/h. The gross vehicle weight is 22,500 kg. The machine runs on 6 wheels. Unladen weight across the Ginaf range ranges from 6,630 to 47,900 kg; the E 3123 sits in the lower part of that range with 13,210 kg. Its immediate neighbours are the X2121 below it with 13,200 kg and the LE3123 above it with 13,480 kg. 245 Ginaf models are on record. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Ginaf – other trucks: the collective page of Dutch heavy vehicles outside the named ranges, from the C and E through the F, G and K to HD and X, 6.6 to 47.9 tonnes unladen weight, DAF cabs on a reinforced Ginaf chassis

This page gathers Ginaf trucks the register could not assign to a named range. Ginaf, founded in 1948 in Veenendaal, the Netherlands (the name comes from 'Geïmporteerde Isuzu- en Amerikaanse vrachtwagens', later from 'Gebroeders Van Ginkel Automobielfabriek'), builds multi-axle and all-wheel-drive trucks for heavy-haulage, construction, fire-brigade and military use, since the 1970s usually with DAF cabs on its own reinforced chassis with up to four axles and 8X8 drive. The range letters C, E, F, G, K and M historically denoted different weight and axle-configuration classes, the following number the tonnage or engine; HD and X denote newer heavy and special chassis.

Read on 3 more paragraphs

The register lists here 172 versions from six-cylinders of up to 18,131 cm³, unladen weights from 6,630 to 47,900 kg, gross weights from 9,450 to 50,000 kg and widths from 2,200 to 2,970 mm.

Ginaf is the best-known Dutch make of all-wheel-drive and multi-axle trucks outside the volume manufacturers and supplies mainly construction, fire brigades, the military and disaster relief with vehicles combining series-production DAF engineering with axles and drivetrain designed for extreme off-road capability.

On used Ginaf vehicles, the condition of the transfer case and axle differentials, corrosion on the reinforced chassis frame, and the condition of tyres and portal axles on off-road versions count, and since the cabs come from DAF, the usual checkpoints on engine and electrics there as well; chassis parts run exclusively through Ginaf, cab and engine parts through the DAF network.

Sources: Kennwerte der Modelle Ginaf (weitere Modelle), Ginaf Trucks (Hersteller)

Technical data

Dimensions and weights

Length8,450 mmcorrect
Width2,410 mmcorrect
Wheelbase4,200 mmcorrect
Unladen weight13,210 kgcorrect
Gross vehicle weight22,500 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed83 km/hcorrect

Frequently asked questions

How much does the Ginaf E 3123 weigh?

The unladen weight is 13,210 kg.

What is the gross vehicle weight of the Ginaf E 3123?

22,500 kg.

How fast does the Ginaf E 3123 go?

Top speed is 83 km/h.

What are the dimensions of the Ginaf E 3123?

8,450 mm × 2,410 mm.

When was the Ginaf E 3123 built?

Production years: 2020.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare