Start › Telehandlers › Gehl › AWS480T

Gehl AWS480T

Series: Gehl Integrated Tool Carrier

Source: https://www.agrarheute.com/technik/neue-teleskoplader-gehl-5

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AWS480T from Gehl is part of the Gehl Integrated Tool Carrier series. The engine delivers 59.8 hp (44 kW), with a displacement of 3,113.5 cm³. Torque is 195.2 Nm. The unladen weight is 5,299.8 kg. The wheelbase measures 1,920.2 mm. Ground clearance is 320 mm. The tank holds 80.3 litres. The pump delivers 66.2 l/min. The hydraulic tank holds 70 litres. The electrical system runs on 12 V. The engine fitted is the F4M 2011. Rated output across the Gehl range ranges from 20.3 to 116.6 hp; the AWS480T sits in the middle of that range with 59.8 hp. Its immediate neighbours are the CT5-16 below it with 58.8 hp and the CTL65 above it with 67.9 hp. 72 Gehl models across 9 series are on record. The model is listed under Telehandlers. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelF4M 2011correct
Power59.8 hp (44 kW)correct
Torque195.2correct
Displacement3,113.5 cm³correct

Dimensions and weights

Wheelbase1,920.2correct
Ground clearance320correct
Unladen weight5,299.8 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow66.2 l/mincorrect
Hydraulic oil capacity70 lcorrect
Fuel tank capacity80.3 lcorrect

Other data

Height2,612.1correct

Where this model stands

Power-to-weight ratio: 8.3 kW/t (44 kW / 5.3 t)

Stronger than 5% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Gehl AWS480T have?

The Gehl AWS480T delivers 59.8 hp.

How much does the Gehl AWS480T weigh?

The unladen weight is 5,300 kg.

What engine does the Gehl AWS480T have?

3,114 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare