Start › Excavators & compaction › Gehl › 753Z

Gehl 753Z

Series: Gehl Midi Excavator

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Gehl 753Z belongs to the Gehl Midi Excavator series. The engine delivers 70 hp (42.5 kW), has 4 cylinders, with a displacement of 3,310.2 cm³. Rated speed is 2,100 rpm. The unladen weight is 7,699.7 kg. Ground clearance is 341.4 mm. The tank holds 93.1 litres. The pump delivers 209.7 l/min. The hydraulic tank holds 99.2 litres. Working pressure is 260 bar. The electrical system runs on 12 V. The engine fitted is the Yanmar 4TNV98-VNS. A TIER II. The Gehl Midi Excavator series covers 4 models. 72 Gehl models across 9 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine model	Yanmar 4TNV98-VNS, A TIER IIcorrect
Power	70 hp (42.5 kW)correct
Rated speed	2,100 rpmcorrect
Cylinders	4correct
Displacement	3,310.2 cm³correct

Dimensions and weights

Ground clearance	341.4correct
Unladen weight	7,699.7 kgcorrect

Drivetrain and chassis

System voltage	12 Vcorrect

Working data

Pump flow	209.7 l/mincorrect
Hydraulic oil capacity	99.2 lcorrect
Hydraulic pressure	260 barcorrect
Fuel tank capacity	93.1 lcorrect

Other data

Height	2,667correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (42 kW / 7.7 t)

Stronger than 13% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Gehl 753Z have?

The Gehl 753Z delivers 70 hp.

How much does the Gehl 753Z weigh?

The unladen weight is 7,700 kg.

What engine does the Gehl 753Z have?

4 cylinders, 3,310 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →