Fukuta AEEK

Series: Other models

Source: https://www.tractordata.com/farm-tractors/002/9/3/2937-merce

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fukuta AEEK is a three-phase induction motor built by Fukuta. The rated output is 22 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 180 M in foot-mounted form. The protection class is IP54. The efficiency is 93.5 per cent at full load, 94 per cent at 75 per cent load and 94 per cent at half load. The motor weighs 195 kg. The mounting arrangement to IEC 60034-7 is B3. The motor is built in Taiwan. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output within this group ranges from 0.18 to 1,119 kW; the AEEK sits at the bottom of that range with 22 kW. Its immediate neighbours are the 5KS284SAA2054W8 below it with 18.7 kW and the 5KS286SAA137 above it with 22.4 kW. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output	22 kWcorrect

Dimensions and weights

Weight	195 kgcorrect

Electrical data

Number of poles	4correct
Protection class	IP54correct
Frame size	180 M (foot)correct
Mounting (IEC 60034-7)	B3correct
Efficiency at full load	93.5 %correct
Efficiency at 75 % load	94 %correct
Efficiency at half load	94 %correct

Origin and approval

Country of manufacture	Taiwancorrect
Standard applied	AS/NZS 1359.5:2004correct
Test method	IEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Fukuta AEEK have?

The Fukuta AEEK delivers 22 kW.

What to check before buying

Match the data plate against the order: frame size, mounting and rating have to agree.
Check the ingress rating against the installation site — outdoors or in dust the demands differ.
Hold the mounting form and dimensions against the existing seat before ordering.
The pole count sets the speed — when replacing an older unit, compare this first.
For used units, ask about winding condition and bearing play.
Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.