Foton 254A
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Foton 254A is a tractor made by Foton. The engine produces 19 kW.
Propulsion comes from MFWD.
It runs on diesel; the engine is water-cooled. The predecessor was the Foton 254. Within the range, rated power spans from 13 to 220 kW; with 19 kW, the 254A sits in the lower third. Directly alongside are the 254 with 18.4 kW below and the 304 with 22 kW above.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 25 hp (19 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Chinacorrect |
|---|---|
| Predecessor | Foton 254correct |
Frequently asked questions
How much power does the Foton 254A have?
The Foton 254A delivers 25 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.