Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Finn Ursus › 1014

Finn Ursus 1014

Built: 1984-1984 · Series: Other models

More machines from model year 1984

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 1014 comes from Finn Ursus. Production: 1984. The engine delivers 100 hp (75 kW), has 4 cylinders. The engine is water-cooled. The engine fitted is the Z 8002 / 1. Rated output across the Finn Ursus range ranges from 100 to 155 hp; the 1014 sits at the bottom of that range with 100 hp. Its immediate neighbours are the 1224 DL Turbo above it with 146 hp. Rated output across the Finn Ursus range ranges from 75 to 116 kW; here the 1014 sits at the bottom of that range with 75 kW. 5 Finn Ursus models are on record.

Finn Ursus – other models: tractors outside the named ranges, the 1014, 1224 DL Turbo, 1614, 914 and 914 DL, 75 to 116 kW, four- and six-cylinder engines

This page gathers the Finn Ursus tractors 1014, 1224 DL Turbo, 1614, 914 and 914 DL, which the register could not assign to a named range. As with many tractor makers, the four-digit type number here distinguishes power steps within the range, while suffixes such as Turbo mark a turbocharged engine variant. In the register the engines carry the designations Z 8401/1, Z 8002/1, Z 8602/1 and Z 8701/1, with cylinder counts from four to six.

Read on 3 more paragraphs

The register lists here 5 versions with 75 to 116 kW, or 100 to 155 hp, from the four- and six-cylinder engines named above; the engine designations differ between the 914, 914 DL, 1014, 1224 DL Turbo and 1614 models in their final digit sequence.

The span of 75 to 116 kW, or 100 to 155 hp, covers within this page tractors from the mid to upper power range, of the kind used for field work, haulage and operating heavier implements that need high draft force. In this power class, PTO work with rotary mowers, round balers or slurry tankers counts among the typical applications, alongside general field and transport duties.

When buying used in this power class, check the condition of the clutch and gearbox, the tightness of the hydraulics for the lift and implements, tyre condition, and on Turbo versions also the turbocharger and charge-air ducting; a documented engine service history also matters.

Sources: Kennwerte der Modelle Finn Ursus (weitere Modelle)

Technical data

Engine

Engine modelZ 8002 / 1correct
Power100 hp (75 kW)correct
Cylinders4correct
Displacement4,562 cccorrect
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Frequently asked questions

How much power does the Finn Ursus 1014 have?

The Finn Ursus 1014 delivers 100 hp.

What engine does the Finn Ursus 1014 have?

4 cylinders.

When was the Finn Ursus 1014 built?

Production years: 1984.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare