Fiat MC 45 XTA
Built: 1997-1997 · Series: MC
More machines from model year 1997
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat MC – the register entry for Fiat's MC-range chassis: four-cylinder diesel engines around 2,500 cm³, gross weights of 3,500 to 4,500 kg, lengths up to 8,200 mm
This collective page gathers Fiat's MC range in the register. Fiat, founded in Turin in 1899, has built the Ducato light commercial vehicle since 1981, serving as the base for panel vans, flatbeds and chassis carrying third-party bodies, and produced since 1994 jointly with PSA at the Sevel plant in Val di Sangro, Italy. The MC versions recorded in the register show the four-cylinder diesel engines of around 2.5 litres typical of this segment, and gross weights in the range of 3.5 to 4.5 tonnes, as is usual for long-wheelbase chassis carrying third-party bodies; the suffixes T, D and XTA in the type designation mark different equipment levels of the respective chassis.
Read on 3 more paragraphs
The register lists 5 versions with displacements around 2,500 cm³ from four-cylinder engines throughout, unladen weights from 3,000 to 3,760 kg and gross weights from 3,500 to 4,500 kg; lengths range from 7,600 to 8,200 mm, widths from 2,160 to 2,500 mm.
Fiat chassis of this weight class form the base across Europe for a wide range of third-party bodies, from box bodies to refrigerated vehicles to special-purpose vehicles, competing directly with comparable chassis from Mercedes-Benz, Iveco and Renault.
On a used Fiat MC, rust on the chassis frame and wheel arches, the condition of the turbocharger and injection system of the four-cylinder diesel engine, the clutch and braking system, and on long-wheelbase versions the torsional stiffness of the frame all count; parts run through the dense Fiat and Stellantis network.
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Width | 2,280 mmcorrect |
|---|---|
| Wheelbase | 4,540 mmcorrect |
| Unladen weight | 3,200 kgcorrect |
| Gross vehicle weight | 4,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Fiat MC 45 XTA weigh?
The unladen weight is 3,200 kg.
What is the gross vehicle weight of the Fiat MC 45 XTA?
4,500 kg.
What engine does the Fiat MC 45 XTA have?
4 cylinders.
When was the Fiat MC 45 XTA built?
Production years: 1997.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.