Feldbinder KIP63.3
Built: 2001-2017 · Series: Other models
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Feldbinder – other models: the collective page of tank, silo and tipping semi-trailers outside the named ranges, EUT, KIP and TSA ranges, 3.8 to 10.28 t unladen weight, up to 43 t gross weight, up to 14.04 m length
This page gathers the Feldbinder semi-trailers the register could not assign to a named range – tank, silo and tipping semi-trailers of the EUT, TEUT, HEUT, TSA and KIP ranges. Feldbinder of Wesenberg in Mecklenburg-Vorpommern is among the leading European makers of tank and silo semi-trailers for bulk goods, food and liquids; the KIP range denotes the tipping silo semi-trailers, and the digits after the codes usually give the axle count and the capacity or axle load of the respective range; the digit after the point often gives the axle count, as in the 3 in EUT 40.3 for the three-axle semi-trailer.
Read on 3 more paragraphs
The register lists here 54 versions with unladen weights from 3,800 to 10,280 kg, gross weights from 18,000 to 43,000 kg, lengths from 7,280 to 14,040 mm and widths from 2,500 to 2,550 mm.
Feldbinder is among the well-known brands of silo and tank transport in Europe and supplies the agricultural, food and building-materials industries; the semi-trailers compete with makers such as Spitzer, Kässbohrer and Fliegl.
On a used example, the tightness of the tank or silo vessel, the condition of hatches, valves and the unloading system, axles, brakes and air suspension, corrosion on frame and fittings, and a complete inspection and service history count; spare parts run through the Feldbinder service network.
Sources: Kennwerte der Modelle Feldbinder (weitere Modelle), Feldbinder Spezialfahrzeugwerke (Hersteller)
Technical data
Dimensions and weights
| Length | 13,890 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,110 mmcorrect |
| Unladen weight | 8,060 kgcorrect |
| Gross vehicle weight | 40,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Feldbinder KIP63.3 weigh?
The unladen weight is 8,060 kg.
What is the gross vehicle weight of the Feldbinder KIP63.3?
40,000 kg.
Up to what speed is the Feldbinder KIP63.3 approved?
Approved up to 100 km/h.
What are the dimensions of the Feldbinder KIP63.3?
13,890 mm × 2,550 mm.
When was the Feldbinder KIP63.3 built?
Production years: 2001-2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
334S
334ST
Alu45
CONCK 30.3
CONCK 40.3
EG-EUT.3.36.3/1
EKT 46.3
EUR 46.3
EUT 40.3
EUT 49.3
EUT 53.3
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.