Start › Trucks over 7.5 t › Faun Services › FRONTPRESS

Faun Services FRONTPRESS

Built: 2018-2018 · Series: Other models

Source: https://www.faun.com/powerpress-hecklader-fuer-schwerlast-fa

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Faun Services FRONTPRESS is a machine built by Faun Services. Production: 2018. The engine delivers 265 kW, has 6 cylinders, with a displacement of 10,518 cm³. The machine is 10,100 mm long and 2,550 mm wide. The unladen weight is 17,570 kg. The gross vehicle weight is 26,000 kg. Rated output within this group ranges from 2 to 2,140 kW; the FRONTPRESS sits at the bottom of that range with 265 kW. Its immediate neighbours are the 9-FM62RB-A8-TA-STEER-6X2/460+137 below it with 264.5 kW and the P 360 DB6X2HNB above it with 265.5 kW. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Technical data

Engine

Power265 kWcorrect
Cylinders6correct
Displacement10,518 cm³correct

Dimensions and weights

Length10,100 mmcorrect
Width2,550 mmcorrect
Unladen weight17,570 kgcorrect
Gross vehicle weight26,000 kgcorrect

Where this model stands

Power-to-weight ratio: 15.1 kW/t (265 kW / 17.6 t)

Stronger than 46% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Faun Services FRONTPRESS have?

The Faun Services FRONTPRESS delivers 265 kW.

How much does the Faun Services FRONTPRESS weigh?

The unladen weight is 17,570 kg.

What is the gross vehicle weight of the Faun Services FRONTPRESS?

26,000 kg.

What engine does the Faun Services FRONTPRESS have?

6 cylinders, 10,518 cm³ displacement.

What are the dimensions of the Faun Services FRONTPRESS?

10,100 mm × 2,550 mm.

When was the Faun Services FRONTPRESS built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare