Start › Electric motors › Fasco › MS2-132S-4

Fasco MS2-132S-4

Series: Other models

The photo shows the Y2E1-100L-2 from the same series. Source: https://www.weg.net/catalog/weg/ES/pt/Motores-El%C3%A9tricos

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fasco MS2-132S-4 is a three-phase induction motor built by Fasco. The rated output is 5.5 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 415 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 89.2 per cent at full load, 85.5 per cent at 75 per cent load and 75.1 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B14 and B35. The motor is built in China. The figures come from the Australian MEPS register under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Fasco range ranges from 0.75 to 160 kW; the MS2-132S-4 sits at the bottom of that range with 5.5 kW. Its immediate neighbours are the YHE-160M1-8 below it with 4 kW and the FMS2-132M-4 above it with 7.5 kW. 195 Fasco models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output5.5 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B35correct
Efficiency at full load89.2 %correct
Efficiency at 75 % load85.5 %correct
Efficiency at half load75.1 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedAS/NZS 1359.5:2004correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Fasco MS2-132S-4 have?

The Fasco MS2-132S-4 delivers 5.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

809B34RTB-A11S

809B34STB-A12S

FMS2-100L-2

FMS2-100L-6

FMS2-100L1-4

FMS2-100L2-4

FMS2-112M-2

FMS2-112M-4

FMS2-112M-6

FMS2-132M-4

FMS2-132M1-6

FMS2-132M2-6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare