Technical register for agricultural, construction and commercial machinery · sourced data
StartElectric motorsFasco › MS2-112-2W

Fasco MS2-112-2W

Series: Other models

The photo shows the YHE-132M-4 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/nord-sk-132-m-4-bre10

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MS2-112-2W from Fasco is a three-phase induction motor. The rated output is 4 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 112 M in foot-mounted form. The protection class is IP55. The efficiency is 87.6 per cent at full load, 86.1 per cent at 75 per cent load and 85.3 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B14 and B35. The motor is built in China. The figures come from the Australian MEPS register under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Fasco range ranges from 0.75 to 160 kW; the MS2-112-2W sits at the bottom of that range with 4 kW. Its immediate neighbours are the YHE-132S-6 below it with 3 kW and the FMS2-132M2-6 above it with 5.5 kW. 195 Fasco models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Fasco – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 160 kW, 2- to 8-pole, IP55 throughout, Chinese manufacture, efficiencies up to 95.7%

This page gathers the three-phase motors registered under the Fasco brand in the Australian GEMS/MEPS register that could not be assigned to a named range. Fasco has traditionally specialised in small and fractional-horsepower motors, for instance for fans, pumps and blowers, and today belongs to the US drives and industrial group Regal Rexnord. The three-phase motors recorded here come almost entirely from Chinese manufacture, with a small share from Thailand. The type codes follow the pattern FMS2-frame size-pole count, for example FMS2-100L-2 for a motor of frame size 100L with two poles; some older models carry differently structured order-number codes such as 809B34RTB-A11S, whose structure cannot be reliably decoded from the register.

Read on 3 more paragraphs

The register lists here 195 versions from 0.75 to 160 kW, 2- to 8-pole, with efficiencies from 77.7 to 95.7% at full load and 76.1 to 96.1% at 75% load, almost entirely in protection class IP55 and frame sizes from 80 to 355 (IEC). Only two of the 195 models carry the "2005 High Efficiency Level" classification; the rest have no GEMS efficiency classification.

As part of Regal Rexnord, Fasco represents in the register the industrial three-phase motor range alongside its actual core business of small specialty motors; the models gathered here form the broad middle ground of standard motors not assigned to any separately maintained range.

For used Fasco standard motors, the usual checkpoints apply: measure the winding's insulation resistance, check the bearings for running noise and play, check the shaft turns freely, assess the condition of the fan and fan cowl, and match frame size, pole count and efficiency class on the rating plate against the intended application. For inverter operation, check separately whether the winding insulation and bearings are rated for it, since the register carries no data on this.

Sources: Kennwerte der Modelle Fasco (weitere Modelle), Fasco (Regal Rexnord, Hersteller)

Technical data

Engine

Rated output4 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B35correct
Efficiency at full load87.6 %correct
Efficiency at 75 % load86.1 %correct
Efficiency at half load85.3 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Fasco MS2-112-2W have?

The Fasco MS2-112-2W delivers 4 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare