Farmi Pro 35AL
Built: 2006-2007 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Farmi Pro 35A – agricultural and forestry trailer, EU class O2, built in 2004: 3,500 kg gross weight, 2,750 kg payload, 6.30 m length.
With a gross weight of 3,500 kg, the Farmi Pro 35A sits right at the upper limit of EU trailer class O2. Here too the type designation carries the weight class in its name: "35" stands for 3.5 tonnes gross weight. Trailers of this size are a common sight in agriculture and forestry, towed by tractors or light commercial vehicles.
Read on 3 more paragraphs
With an unladen weight of only 750 kg, payload comes to 2,750 kg, a high payload-to-unladen-weight ratio for this class. At 6.30 m long and 2.32 m wide, the trailer is comparatively narrow yet long, a shape typical of transport for long loads, round timber or farm harvest.
Class O2 trailers usually run on a simple overrun brake rather than an air system. A towing vehicle with a category B licence can only tow a trailer of this size, depending on the permitted combined train weight, with the added category BE; agricultural tractors are governed by their own category T rules. The slender shape favours stability against tipping under uneven loading.
When buying a used trailer of this kind, check the overrun coupling for smooth action and check the brake cables for wear, check the load bed for deformation caused by point loads such as round timber, check the tyres for uneven wear from field use, and check the towing eye for play in the hitch. Check also the mudguards for cracks caused by stone impact during field work.
Sources: SpecCodex-Register: Kennwerte des Modells Farmi Pro 35A, Zulassungsdaten Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 6,650 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Unladen weight | 840 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Frequently asked questions
How much does the Farmi Pro 35AL weigh?
The unladen weight is 840 kg.
What is the gross vehicle weight of the Farmi Pro 35AL?
3,500 kg.
What are the dimensions of the Farmi Pro 35AL?
6,650 mm × 2,520 mm.
When was the Farmi Pro 35AL built?
Production years: 2006-2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
