Fantech Y2AE100L1-4
Series: Y2AE100L1-4
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fantech Y2AE100L1-4 – three-phase motor from the Australian ventilation brand: IEC frame 100, four-pole, 2.2 kW, IP55, MEPS-registered with three mounting variants
Y2AE100L1-4 is the four-pole version of the Y2AE range from the 100L1 frame band that Fantech, an Australian manufacturer of ventilation and extraction equipment, has registered under Australia's GEMS/MEPS energy efficiency standard. The type designation follows IEC frame-size logic: 100L1 denotes the frame size, and the trailing 4 denotes the pole count – the register confirms four poles across all five versions on this page. Alongside the base model there is a flange version B14 and combined foot-flange variants B3/B5.
Read on 3 more paragraphs
The register lists five versions with a rated output of 2.2 kW throughout, an efficiency span of 84.2 to 85% at full load and 84.6 to 85.6% at 75% load. Frame size stays at 100 across all models, protection is IP55 throughout, and the voltage entries are mostly 400/415/460 V. Manufacturing takes place in China, tested under the 2019 GEMS determination for three-phase motors, mostly using test method 2-1-1B.
As a drive for fans, extract systems and ventilation units, the Y2AE100L1-4 covers a mid output range of Fantech's programme, through which the company supplies mainly the Australia-Pacific market for commercial and residential ventilation. The four-pole design at roughly 1,400 rpm synchronous speed suits duct and axial fans with moderate airflow.
When swapping or buying used, check bearing condition, insulation resistance of the winding, visible corrosion on the terminal box and fan cover, and a legible nameplate showing frame size, pole count and protection class. The mounting code needed at the installation point is decisive, since B3, B5 and B14 versions have different fixing geometries. Spare parts run through the Fantech sales network.
Technical data
Engine
| Engine family | Y2AE100L1-4correct |
|---|---|
| Engine families | Y2AE100L1-4correct |
| Rated output | 2.2 kWcorrect |
Electrical data
| Rated voltage | 400/415/460 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP55correct |
| Frame size | 100 L (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B14correct |
| Efficiency at full load | 84.2 %correct |
| Efficiency at 75 % load | 84.6 %correct |
| Efficiency at half load | 82.9 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
How much power does the Fantech Y2AE100L1-4 have?
The Fantech Y2AE100L1-4 delivers 2.2 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.