Evers EKB 5.43
Built: 2004-2004 · Series: EKB
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Evers EKB – tipping and tandem-axle trailers for agriculture outside the named ranges, 19 versions, unladen weight 1,780 to 5,020 kg, gross vehicle weight up to 8.5 tonnes
Evers is a Lower Saxon manufacturer of agricultural trailers, specialising in tipping and tandem-axle trailers for arable farming and livestock. This collective page gathers the versions of the EKB line that the register could not assign to a narrower subgroup. The type designations order the vehicles by payload class and axle count, from light single-axle to tandem tippers for grain and beet haulage.
Read on 3 more paragraphs
The register lists here 19 versions with unladen weights from 1,780 to 5,020 kg, gross vehicle weights from 3,500 to 8,500 kg, lengths from 7,750 to 11,300 mm and widths from 1,700 to 2,550 mm.
The line thus covers the mid-size segment of agricultural tipping trailers, alongside Fliegl, Brantner, Conow and Kaweco: grain and beet haulage at harvest, slurry and manure runs, and silage and chopped-forage transport on farm and field. Unlike pure road semi-trailers, these units are built for tractor operation, field tracks and changing hitched implements.
When buying used, check the condition of the frame and load bed (corrosion, welds at the mounting points), the tightness of the tipping rams and hydraulic lines, wear on the side panels and hitch, and the state of the braking system and lighting. Spare parts for rams, side panels and axles run through the Evers dealer network and independent farm equipment dealers.
Sources: Kennwerte der Modelle Evers EKB
Technical data
Dimensions and weights
| Length | 9,970 mmcorrect |
|---|---|
| Width | 1,750 mmcorrect |
| Wheelbase | 5,970 mmcorrect |
| Unladen weight | 3,280 kgcorrect |
| Gross vehicle weight | 5,400 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Evers EKB 5.43 weigh?
The unladen weight is 3,280 kg.
What is the gross vehicle weight of the Evers EKB 5.43?
5,400 kg.
Up to what speed is the Evers EKB 5.43 approved?
Approved up to 100 km/h.
What are the dimensions of the Evers EKB 5.43?
9,970 mm × 1,750 mm.
When was the Evers EKB 5.43 built?
Production years: 2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
E.K.B 3.5.2
EKB
EKB 2.0
EKB 3.5
EKB 3.5 32
EKB 3.5.2.
EKB 3.5.3
EKB 35 2
EKB 35 32
EKB 352
EKB 4.2.2
EKB 4.4.2.
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.