EMS 180L-6

Series: Other models

The photo shows the 90L-6 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/vem-k21r-90-l-6-1-1kw

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EMS 180L-6 is a three-phase induction motor. The rated output is 15 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 180. The protection class is IP55. The efficiency is 89 per cent at full load, 90.2 per cent at 75 per cent load and 89.5 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B35 and B14. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to IEC 60034-2-1 (Edition 2.0). Rated output across the EMS range ranges from 0.75 to 55 kW; the 180L-6 sits in the lower part of that range with 15 kW. Its immediate neighbours are the 180L-8 below it with 11 kW and the 160L-2 above it with 18.5 kW. 59 EMS models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output	15 kWcorrect

Electrical data

Rated voltage	415 Vcorrect
Number of poles	6correct
Protection class	IP55correct
Frame size	180correct
Mounting (IEC 60034-7)	B3, B5, B35, B14correct
Efficiency at full load	89 %correct
Efficiency at 75 % load	90.2 %correct
Efficiency at half load	89.5 %correct

Origin and approval

Country of manufacture	Chinacorrect
Standard applied	AS/NZS 1359.5:2000 (Legacy)correct
Test method	IEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the EMS 180L-6 have?

The EMS 180L-6 delivers 15 kW.

What to check before buying

Match the data plate against the order: frame size, mounting and rating have to agree.
Check the ingress rating against the installation site — outdoors or in dust the demands differ.
Hold the mounting form and dimensions against the existing seat before ordering.
The pole count sets the speed — when replacing an older unit, compare this first.
For used units, ask about winding condition and bearing play.
Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

EMS 180L-6

Technical data

Engine

Electrical data

Origin and approval

Frequently asked questions

What to check before buying

Other models in this series

100L-2

100L-6

100L1-4

100L1-8

100L2-4

100L2-8

112M-2

112M-4

112M-6

112M-8

132M-4

132M-8

Electric motor in 3D section