EMS 132S-4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
EMS – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, manufactured in China, frame sizes 80 to 250, 0.75 to 55 kW, 2- to 8-pole, IP55
This page gathers the EMS three-phase motors the Australian energy-efficiency register could not assign to a named range. No confirmed data on the company itself is available. The type designations, such as 100L-2 or 160M-6, follow the plain IEC scheme of frame size, length and pole count with no brand prefix.
Read on 3 more paragraphs
The register lists here 59 versions with 0.75 to 55 kW, two- to eight-pole, full-load efficiencies from 70.93 to 93% and at 75% load from 70.45 to 94%. Frame sizes run from 80 to 250, all motors are recorded with IP55 protection and mounting code B3/B5/B35/B14. China is recorded throughout as the manufacturing country. Testing followed the older 2000 Legacy AS/NZS 1359.5 standard throughout, with test method B; of 59 motors, 5 reach the 2001 High Efficiency Level and 1 both classifications, 53 stay unclassified.
Limited to frame sizes up to 250 and outputs up to 55 kW, EMS covers the lower to mid segment of classic standard motors, used mainly in pumps, fans and general drive tasks.
When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible corrosion on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size and pole count; since almost the entire range is registered under the older Legacy standard, inverter suitability should be checked before variable-speed operation. Spares and support depend on the distribution channel.
Sources: Kennwerte der Modelle EMS (weitere Modelle, MEPS-Registrierungen)
Technical data
Engine
| Rated output | 5.5 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP55correct |
| Frame size | 132correct |
| Mounting (IEC 60034-7) | B3, B5, B35, B14correct |
| Efficiency at full load | 85.7 %correct |
| Efficiency at 75 % load | 87 %correct |
| Efficiency at half load | 85 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | AS/NZS 1359.5:2000 (Legacy)correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
How much power does the EMS 132S-4 have?
The EMS 132S-4 delivers 5.5 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.