Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Eksjövagnen › FS 18-20

Eksjövagnen FS 18-20

Built: 2015 · Series: Other models

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The FS 18-20 comes from Eksjövagnen. Production: 2015. The vehicle is 12,570 mm long and 2,600 mm wide. The unladen weight is 8,225 kg. The gross vehicle weight is 40,000 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the FS 18-20 sits at the bottom of that range with 8,225 kg. Its immediate neighbours are the OSD-48-03V/L below it with 8,220 kg and the VR 12-27X above it with 8,226 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the FS 18-20 sits at the bottom of that range with 40,000 kg.

Eksjövagnen FS 18-20 – heavy EU category O4 trailer with a 40,000 kg gross weight, 8,225 kg unladen weight, 31,775 kg payload, 12.57 m length and 2.60 m width

At a gross weight of 40,000 kg, the FS 18-20 counts among the heaviest members of EU trailer category O4, the trailers above 10 tonnes used in freight transport. This category requires a compressed-air brake system with load-dependent, multi-axle brake distribution.

Read on 3 more paragraphs

At an unladen weight of 8,225 kg, the payload comes to 31,775 kg, nearly four times the trailer's own weight. At 12.57 m the FS 18-20 counts among the longer trailers in its category, spreading the high payload over a correspondingly large area. At 2.60 m width, the FS 18-20 slightly exceeds the general 2.55 m envelope for road vehicles.

Towing combinations in this weight class require a category CE licence. At a 40-tonne gross weight, road approval also depends on the number and spacing of the axles, since permitted axle loads are capped and the total weight has to be spread across several axles accordingly.

When buying used, given the high gross weight the axle bearings and spring elements on each axle deserve particular attention, along with the tightness of the air lines and couplings along the full length, the frame for cracking around the axle mounts, and even tyre wear. The coupling and its bearing are worth checking too, given the forces this weight class puts through it, along with the mudguards and marker lights along the long body.

Sources: SpecCodex-Register: Kennwerte des Modells Eksjövagnen FS 18-20

Technical data

Dimensions and weights

Length12,570 mmcorrect
Width2,600 mmcorrect
Unladen weight8,225 kgcorrect
Gross vehicle weight40,000 kgcorrect

Frequently asked questions

How much does the Eksjövagnen FS 18-20 weigh?

The unladen weight is 8,225 kg.

What is the gross vehicle weight of the Eksjövagnen FS 18-20?

40,000 kg.

What are the dimensions of the Eksjövagnen FS 18-20?

12,570 mm × 2,600 mm.

When was the Eksjövagnen FS 18-20 built?

Production years: 2015.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare