Self-build (Eigenbouw) PLA 2080
Built: 2019-2019 · Series: Trailers up to 3.5 t (Class O2)
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eigenbouw – self-built trailers up to 3.5 t (class O2) from the Dutch RDW register: not a manufacturer but the entry “self-build” after individual approval, model names as weight, axle count or type, 240 to 3,500 kg kerb weight, 1,240 to 2,560 mm wide
Eigenbouw is Dutch for “self-build” and not a manufacturer: the registration authority RDW enters the term when a trailer was built by its keeper or a business and registered through an individual inspection (individuele keuring) – necessary in the Netherlands for every braked trailer over 750 kg, because these trailers carry a plate of their own, while unbraked trailers up to 750 kg run on the towing car's plate. This collective page covers class O2 up to 3.5 t. The model designations are the details from the approval: the gross weight (1000 KG, 1500, 2500), the axle count (1-assige aanhangwagen, 2 assige AHW, 3 assige aanhanger – AHW is the abbreviation of aanhangwagen), the purpose (2 Paards for the two-horse trailer, Schamel for the turntable) or a number.
Read on 3 more paragraphs
The register lists 481 versions with kerb weights from 240 to 3,500 kg, gross weights from 800 to 3,500 kg and widths from 1,240 to 2,560 mm.
Behind the entry are the working trailers of Dutch everyday life: horse trailers, turntable trailers for nurseries and farms, low loaders for mini excavators and ride-on mowers, boat trailers, market and catering trailers – built from series axles, overrun couplings and lighting from trade suppliers and checked by the RDW for braking performance, lighting, dimensions and marking.
Anyone taking over such a trailer checks the RDW papers and registered weights, frame and welds, overrun brake, brake cables and reversing mechanism, axles, wheel bearings and tyres, coupling and breakaway cable, lighting; wear parts usually come from Knott, AL-KO or BPW and are available through trailer dealers.
Sources: Kennwerte der Modelle Eigenbouw Anhänger bis 3,5 t (Klasse O2), RDW (Niederlande), Herstellerfeld eigenbouw, RDW (niederländische Zulassungsbehörde)
Technical data
Dimensions and weights
| Width | 2,140 mmcorrect |
|---|---|
| Wheelbase | 610 mmcorrect |
| Unladen weight | 1,100 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Eigenbouw PLA 2080 weigh?
The unladen weight is 1,100 kg.
What is the gross vehicle weight of the Eigenbouw PLA 2080?
3,500 kg.
Up to what speed is the Eigenbouw PLA 2080 approved?
Approved up to 100 km/h.
When was the Eigenbouw PLA 2080 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.