Eco Log 590C

Series: Eco Log Harvester

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 590C from Eco Log is part of the Eco Log Harvester series. The engine delivers 224.5 kW, with a displacement of 8,801.5 cm³. Torque is 1,371 Nm. The unladen weight is 21,000 kg. The wheelbase measures 4,035.6 mm. Top speed is 15.1 km/h. The tank holds 400.1 litres. The hydraulic tank holds 150.3 litres. The electrical system runs on 24 V. The engine fitted is the C9 ACERT tier III. The Eco Log Harvester series covers 3 models. Rated output within it ranges from 149.9 to 224.5 kW; the 590C sits at the top of that range with 224.5 kW. Its immediate neighbours are the 580B below it with 167.8 kW. 6 Eco Log models across 2 series are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC9 ACERT tier IIIcorrect
Power224.5 kWcorrect
Torque1,371correct
Displacement8,801.5 cm³correct

Dimensions and weights

Width3,072.4correct
Wheelbase4,035.6correct
Unladen weight21,000 kgcorrect

Drivetrain and chassis

Gearbox type6 wheel drive hydrostatic transmissioncorrect
Top speed15.1 km/hcorrect
System voltage24 Vcorrect

Working data

Hydraulic oil capacity150.3 lcorrect
Fuel tank capacity400.1 lcorrect

Other data

Height4,821.9correct

Where this model stands

Power-to-weight ratio: 10.7 kW/t (224 kW / 21 t)

Stronger than 83% of the harvesting machinery in the register — out of 284 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Eco Log 590C have?

The Eco Log 590C delivers 224 kW.

How much does the Eco Log 590C weigh?

The unladen weight is 21,000 kg.

What engine does the Eco Log 590C have?

8,802 cm³ displacement.

How fast does the Eco Log 590C go?

Top speed is 15.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare