StartForestry equipmentEco Log › 574B

Eco Log 574B

Series: Eco Log Forwarder

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Eco Log 574B is a model in the Eco Log Forwarder series. The engine with a displacement of 6,000.9 cm³. Ground clearance is 652.3 mm. Top speed is 25.1 km/h. The tank holds 150.3 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The hydraulic tank holds 145.4 litres. The electrical system runs on 24 V. The engine fitted is the 3056E. 6 Eco Log models across 2 series are on record. The model is listed under Forestry equipment. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model3056Ecorrect
Displacement6,000.9 cm³correct

Dimensions and weights

Ground clearance652.3correct

Drivetrain and chassis

Gearbox typehydrostatic transmission mechanical gearboxcorrect
Forward gears2correct
Reverse gears2correct
Top speed25.1 km/hcorrect
System voltage24 Vcorrect

Working data

Hydraulic oil capacity145.4 lcorrect
Fuel tank capacity150.3 lcorrect

Frequently asked questions

What engine does the Eco Log 574B have?

6,001 cm³ displacement.

How fast does the Eco Log 574B go?

Top speed is 25.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Forwarder in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare