Start › Road construction › Dynapac › CC800

Dynapac CC800

Series: Dynapac Vibratory Smooth Drum Roller

Source: https://dynapac.com/en/products/compaction/cc800

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CC800 from Dynapac is part of the Dynapac Vibratory Smooth Drum Roller series. The engine delivers 23.8 hp (17.5 kW). The engine comes from Perkins 2351. Rated speed is 2,600 rpm. The machine is 2,032 mm long and 865.6 mm wide. The unladen weight is 1,678.3 kg. The wheelbase measures 1,346.2 mm. Ground clearance is 254 mm. Top speed is 9.7 km/h. The tank holds 23.1 litres. The engine fitted is the 403D-11. The Dynapac Vibratory Smooth Drum Roller series covers 144 models. Rated output within it ranges from 19.3 to 231.2 hp; the CC800 sits at the bottom of that range with 23.8 hp. Its immediate neighbours are the CC950 below it with 20.6 hp and the CC1000 PLUS above it with 24.3 hp. 206 Dynapac models across 7 series are on record. The model is listed under Road construction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine makePerkins 2351correct
Engine model403D-11correct
Power23.8 hp (17.5 kW)correct
Rated speed2,600 rpmcorrect
Aspirationwatercooledcorrect

Dimensions and weights

Length2,032correct
Width865.6correct
Wheelbase1,346.2correct
Ground clearance254correct
Unladen weight1,678.3 kgcorrect

Drivetrain and chassis

Top speed9.7 km/hcorrect

Working data

Fuel tank capacity23.1 lcorrect

Other data

Height2,313.4correct

Where this model stands

Power-to-weight ratio: 10.4 kW/t (18 kW / 1.7 t)

Stronger than 5% of the road construction in the register — out of 669 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dynapac CC800 have?

The Dynapac CC800 delivers 23.8 hp.

How much does the Dynapac CC800 weigh?

The unladen weight is 1,678 kg.

How fast does the Dynapac CC800 go?

Top speed is 9.7 km/h.

What are the dimensions of the Dynapac CC800?

2,032 mm × 866 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CA1300D

CA1300PD

CA1300PDB

CA134D

CA1400D

CA1400PD

CA144D

CA1500D

CA1500PD

CA150AD

CA150D

CA150P (BRAZIL)

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare