StartRoad constructionDynapac › CA250P

Dynapac CA250P

Series: Dynapac Vibratory Smooth Drum Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Dynapac CA250P belongs to the Dynapac Vibratory Smooth Drum Roller series. The engine delivers 103.4 hp (76.1 kW). The engine comes from Cummins. Rated speed is 2,200 rpm. The wheelbase measures 2,879.1 mm. Ground clearance is 453.1 mm. Top speed is 7.1 km/h. The engine fitted is the 4BT 3,9-C. Tyre size: 23.1x26. The Dynapac Vibratory Smooth Drum Roller series covers 144 models. Rated output within it ranges from 19.3 to 231.2 hp; the CA250P sits in the lower part of that range with 103.4 hp. Its immediate neighbours are the CC3800 below it with 102 hp and the CA255 above it with 106.5 hp. 206 Dynapac models across 7 series are on record. The model is listed under Road construction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCumminscorrect
Engine model4BT 3.9-Ccorrect
Power103.4 hp (76.1 kW)correct
Rated speed2,200 rpmcorrect

Dimensions and weights

Length5,550.2correct
Wheelbase2,879.1correct
Ground clearance453.1correct

Drivetrain and chassis

Tyre size23, 1x26correct
Top speed7.1 km/hcorrect

Frequently asked questions

How much power does the Dynapac CA250P have?

The Dynapac CA250P delivers 103 hp.

How fast does the Dynapac CA250P go?

Top speed is 7.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare