StartMining equipmentDressta › TD10R

Dressta TD10R Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Dressta TD10R is a model in the Dressta Crawler Tractor series. The engine delivers 111.5 hp (75.3 kW), with a displacement of 4,501.5 cm³. The engine comes from Cummins. Torque is 414.9 Nm. Rated speed is 2,500 rpm. Ground clearance is 381 mm. The tank holds 170.3 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,500 rpm. The cooling system holds 18.5 litres. The oil fill is 11.4 litres. The electrical system runs on 12 V. The engine fitted is the QSB4,5. The Dressta Crawler Tractor series covers 25 models. Rated output within it ranges from 81.1 to 552.6 hp; the TD10R sits at the bottom of that range with 111.5 hp. Its immediate neighbours are the TD9M LGP below it with 100.4 hp and the TD14M above it with 175.4 hp. 32 Dressta models across 3 series are on record. The model is listed under Mining equipment. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCumminscorrect
Engine modelQSB4.5correct
Power111.5 hp (75.3 kW)correct
Rated speed2,500 rpmcorrect
Torque414.9correct
Speed at max. torque1,500 rpmcorrect
Displacement4,501.5 cm³correct
Coolant capacity18.5 lcorrect
Engine oil capacity11.4 lcorrect

Dimensions and weights

Ground clearance381correct

Drivetrain and chassis

Forward gears3correct
Reverse gears3correct
System voltage12 Vcorrect

Working data

Fuel tank capacity170.3 lcorrect

Other data

Height2,721.9correct

Frequently asked questions

How much power does the Dressta TD10R have?

The Dressta TD10R delivers 112 hp.

What engine does the Dressta TD10R have?

4,502 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare