Doosan G20P
Series: Doosan Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Doosan G20P is a forklift truck from the Doosan Forklift series. The engine draws 44.9 kW from 3 litres.
It will not go faster than 21 km/h — a working pace, not a travelling one. Capacity is 1,814 kg.
Within the range, rated power spans from 7.5 to 44.9 kW; with 44.9 kW, the G20P sits at the top. Below it ranks the G32E with 38.3 kW.
Technical data
Engine
| Engine make | 2,374correct |
|---|---|
| Power | 44.9 kWcorrect |
| Displacement | 3,000.5 cm³correct |
Dimensions and weights
| Width | 1,170 mmcorrect |
|---|
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|---|
| Top speed | 21.4 km/hcorrect |
| Turning radius | 2,220 mmcorrect |
Working data
| Lifting capacity | 1,814.4 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | LPcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much power does the Doosan G20P have?
The Doosan G20P delivers 44.9 kW.
What engine does the Doosan G20P have?
3,000 cm³ displacement.
How fast does the Doosan G20P go?
Top speed is 21.4 km/h.
What is the load capacity of the Doosan G20P?
Load capacity is 1,814 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.