Dodge BEEP WC 52
Built: 1943-1943 · Series: BEEP
More machines from model year 1943
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Dodge Beep – five six-cylinder vehicles: kerb weight 2,400 to 3,228 kg, gross vehicle weight 2,610 to 3,500 kg, width 1,980 to 2,130 mm, models 4X4, T223-WC62, WC 51/52/62
Dodge Beep is the designation under which the register lists five vehicles with the model names 4X4, T223-WC62 and WC 51, WC 52 and WC 62. All versions are fitted with six-cylinder engines.
Read on 3 more paragraphs
The register lists here 5 versions with six-cylinder engines, kerb weights of 2,400 to 3,228 kg, gross vehicle weights of 2,610 to 3,500 kg and widths of 1,980 to 2,130 mm; the width varies about as widely as the weight.
With gross vehicle weights of up to 3,500 kg and kerb weights reaching over three tonnes, the heaviest versions in the Beep range are markedly above the lighter models in this group, pointing to different bodies on the same technical base. The spread shows that both lighter passenger-oriented variants and heavier utility versions are grouped under the shared designation.
A used-buying check on these six-cylinder vehicles should cover rust on the frame and bodywork, the condition of the brakes and axles given the high weight, and the cab's weather sealing. On vehicles of this age it is also worth checking the electrical system, the fuel tank for rust perforation, and the leaf springs and wheel bearings, whose wear on commercial vehicles of this type tends to be pronounced. Given the vehicle's age, the tyres, brake hoses and seals should also be checked separately. Spare parts depend on the individual vehicle's condition and should be sourced through specialist dealers.
Sources: Kennwerte der Modelle Dodge Beep, Dodge (Stellantis, Hersteller)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 2,130 mmcorrect |
|---|---|
| Wheelbase | 2,500 mmcorrect |
| Unladen weight | 2,400 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Dodge BEEP WC 52 weigh?
The unladen weight is 2,400 kg.
What is the gross vehicle weight of the Dodge BEEP WC 52?
3,500 kg.
What engine does the Dodge BEEP WC 52 have?
6 cylinders.
When was the Dodge BEEP WC 52 built?
Production years: 1943.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.