Technical register for agricultural, construction and commercial machinery · sourced data
StartTelehandlersDieci › Icarus 40.16

Dieci Icarus 40.16

Series: DIECI Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Dieci Icarus 40.16 belongs to the DIECI Telescopic Forklift series. The engine delivers 100.7 hp (74 kW), has 4 cylinders, with a displacement of 4,485.1 cm³. Rated speed is 2,300 rpm. The unladen weight is 12,000 kg. The tank holds 105.2 litres. The pump delivers 100.3 l/min. The hydraulic tank holds 160.1 litres. Working pressure is 230 bar. The engine fitted is the F4GE0454A-TC. Tyre size: 405/70x24. The DIECI Telescopic Forklift series covers 51 models. Rated output within it ranges from 70.8 to 144.2 hp; the Icarus 40.16 sits in the middle of that range with 100.7 hp. Its immediate neighbours are the Zeus 38.10 below it with 81.6 hp and the Pegasus 38.16 above it with 144.2 hp. 103 Dieci models across 7 series are on record. The model is listed under Telehandlers. 13 verified figures from 1 source are on file.

Dieci Zeus/Apollo/Runner – capacity and reach in a single number

Italian manufacturer Dieci organises its telehandlers into several named ranges: Zeus for compact, agile machines straddling construction and agriculture, Apollo for the fixed-boom range aimed at industry and construction, Runner for versatile machines with a wide attachment range, and Icarus for large construction sites needing high lift capacity and reach.

Read on 3 more paragraphs

The number following the series name works the same way as with other Italian manufacturers: on the Icarus 45.17GD, "45.17" denotes a 4,500 kg capacity and roughly 16 to 17 m of reach — the first number codes capacity in hundreds of kilograms, the second approximates the maximum lift height or reach in metres.

Models recorded in the database span engine outputs of 52 to 106 kW, own weights of 4,800 to 17,500 kg, lift heights up to 21.1 m, and displacement of 3,320 to 4,485 cm³, always four-cylinder — the bucket covers compact through large telehandlers, represented by models such as Zeus 37.7, Zeus 38.10, Apollo 25.6 or Runner 30.9.

As with any telehandler, buying used means checking boom and slide-pad condition and the hydraulic cylinders. The load chart also matters: the capacity named in the type code only applies at minimum reach, and the permissible load can drop considerably as reach increases.

Sources: Kennwerte der Modelle DIECI Telescopic Forklift, - Dieci Australia: Icarus 45.17GD, 4.500 kg / 16,4 m, - Dieci (offiziell): Baureihen Zeus, Apollo, Runner, Icarus

Technical data

Engine

Engine modelF4GE0454A-TCcorrect
Power100.7 hp (74 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement4,485.1 cm³correct

Dimensions and weights

Unladen weight12,000 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission with variable capacity pumpcorrect
Tyre size405/70x24correct

Working data

Lift height15,300 mmcorrect
Pump flow100.3 l/mincorrect
Hydraulic oil capacity160.1 lcorrect
Hydraulic pressure230correct
Fuel tank capacity105.2 lcorrect

More machines with this engine (F4GE0454A-TC, 19)

Where this model stands

Power-to-weight ratio: 6.2 kW/t (74 kW / 12 t)

Stronger than 34% of the telehandlers in the register — out of 661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dieci Icarus 40.16 have?

The Dieci Icarus 40.16 delivers 101 hp.

How much does the Dieci Icarus 40.16 weigh?

The unladen weight is 12,000 kg.

What engine does the Dieci Icarus 40.16 have?

4 cylinders, 4,485 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare