Demac AC 50-1
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Demac AC 50-1 – a heavy special-purpose vehicle with a four-cylinder engine of 7,200 cm³ and 240 kW output, 11,260 mm long and 2,550 mm wide
Demac AC 50-1 is a heavy commercial vehicle from 2006, fitted with an engine of 7,200 cm³ displacement and 240 kW output. This combination of large displacement and high output, on a vehicle 11,260 mm long and 2,550 mm wide, is typical of a vehicle that powers heavy add-on equipment alongside its own drive.
Read on 3 more paragraphs
For this vehicle the register lists an engine of 7,200 cm³ displacement and 240 kW output. Overall length is 11,260 mm, width 2,550 mm.
An engine of this size goes well beyond what would be needed simply to propel a vehicle of this length, pointing to a vehicle with driven working equipment, such as a pump, a milling unit or a similar permanently fitted installation. On special vehicles like this, it is usually the working equipment rather than road propulsion that dictates the choice of engine and drivetrain. The generous width of 2,550 mm makes almost full use of the allowance many European countries grant special vehicles above the usual 2.55-metre limit for ordinary commercial vehicles.
For a used example of this type, check in particular the operating hours and maintenance state of the working unit, the condition of the hydraulic system including hoses and pumps, and the frame and running gear for corrosion and wear under heavy load. The clutch and gearbox of the large-displacement engine should also be checked before buying, along with the seals and fittings around the working equipment for leaks.
Sources: SpecCodex-Register: Kennwerte des Modells Demac AC 50-1
Technical data
Engine
| Power | 240 kWcorrect |
|---|---|
| Displacement | 7,200 cm³correct |
Dimensions and weights
| Length | 11,260 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 40,200 kgcorrect |
Where this model stands
Power-to-weight ratio: 6 kW/t (240 kW / 40.2 t)
Stronger than 39% of the trucks in the register — out of 25,241 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Demac AC 50-1 have?
The Demac AC 50-1 delivers 240 kW.
How much does the Demac AC 50-1 weigh?
The unladen weight is 40,200 kg.
What engine does the Demac AC 50-1 have?
7,200 cm³ displacement.
What are the dimensions of the Demac AC 50-1?
11,260 mm × 2,550 mm.
When was the Demac AC 50-1 built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.