Davey 862
Series: Other models
The Davey 862 is a three-phase induction motor built by Davey. The rated output is 2.2 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The protection class is IP56. The efficiency is 86.1 per cent at full load, 85.8 per cent at 75 per cent load and 83.5 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in Australia. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Davey range ranges from 1.3 to 3.2 kW; the 862 sits in the middle of that range with 2.2 kW. Its immediate neighbours are the 869 below it with 1.9 kW and the 864 above it with 2.43 kW. 9 Davey models are on record. The model is listed under Electric motors. 21 verified figures from 1 source are on file.
Technical data
Engine
| Rated output | 2.2 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 2correct |
| Protection class | IP56correct |
| Frame size | Davey Designcorrect |
| Mounting (IEC 60034-7) | B3correct |
| Efficiency at full load | 86.1 %correct |
| Efficiency at 75 % load | 85.75 %correct |
| Efficiency at half load | 83.48 %correct |
Origin and approval
| Country of manufacture | Australiacorrect |
|---|---|
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
How much power does the Davey 862 have?
The Davey 862 delivers 2.2 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.