Start › Forklift trucks › Dalian › CPCD30FA

Dalian CPCD30FA

Series: Dalian Forklift

The photo shows the CPC30BA from the same series. Source: https://www.lectura-specs.com/en/model/forklifts/diesel-fork

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CPCD30FA from Dalian is part of the Dalian Forklift series. The engine with a displacement of 2,369.6 cm³. Rated speed is 2,650 rpm. The unladen weight is 4,320 kg. The wheelbase measures 1,700.8 mm. Ground clearance is 115.1 mm. Top speed is 20.1 km/h. The fuel is diesel. Maximum torque is reached at 2,000 rpm. The engine fitted is the C240PKJ. The Dalian Forklift series covers 11 models. Unladen weight within it ranges from 3,340 to 5,000 kg; the CPCD30FA sits in the middle of that range with 4,320 kg. Its immediate neighbours are the CPCD25FA below it with 3,710 kg and the CPCD40AA above it with 5,000 kg. 11 Dalian models are on record. The model is listed under Forklift trucks. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC240PKJcorrect
Fueldieselcorrect
Rated speed2,650 rpmcorrect
Speed at max. torque2,000 rpmcorrect
Displacement2,369.6 cm³correct

Dimensions and weights

Width1,225.3correct
Wheelbase1,700.8correct
Ground clearance115.1correct
Unladen weight4,320 kgcorrect

Drivetrain and chassis

Tyre typepneumatic tyrescorrect
Top speed20.1 km/hcorrect

Frequently asked questions

How much does the Dalian CPCD30FA weigh?

The unladen weight is 4,320 kg.

What engine does the Dalian CPCD30FA have?

2,370 cm³ displacement, Diesel.

How fast does the Dalian CPCD30FA go?

Top speed is 20.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CPC20CA

CPC25CA

CPC30BA

CPCD20DA

CPCD20FA

CPCD25DA

CPCD25FA

CPCD30DA

CPCD40AA

CPCD40FA

Sources: [1]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare