Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks over 7.5 t › DAF › XD 300 FA

DAF XD 300 FA

Built: 2022-2026 · Series: XD

More machines from model year 2022

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The XD 300 FA from DAF is part of the XD series. Production: 2022-2026. The engine delivers 220 kW, has 6 cylinders, with a displacement of 10,837 cm³. The machine is 11,560 mm long and 2,600 mm wide. The unladen weight is 14,233 kg. The wheelbase measures 6,100 mm. Top speed is 90 km/h. The gross vehicle weight is 20,500 kg. The machine runs on 6 wheels. The gearbox offers 12 gears. The XD series covers 60 models. Rated output within it ranges from 189 to 330 kW; the XD 300 FA sits in the lower part of that range with 220 kW. Its immediate neighbours are the XD 260 FA below it with 189 kW and the XD 340 FA above it with 251 kW. Unladen weight within it ranges from 7,828 to 21,169 kg; here the XD 300 FA sits in the middle of that range with 14,233 kg. 3352 DAF models across 109 series are on record.

DAF XD – distribution and construction chassis between the LF and CF: six-cylinder engines from 189 to 330 kW, 6.7 to 12.9-litre displacement, up to 49 t gross weight, also electric

DAF introduced the XD in 2022 to close the gap between the lighter LF and the heavier CF; the range is built in Westerlo, Belgium, by DAF Trucks, a subsidiary of the American Paccar group. The three-digit types such as XD 230, XD 300 and XD 450 roughly indicate engine output in horsepower, the FA suffix denotes a chassis-cab with a single cab, FT the short bonneted cab, and codes such as FAG, FAN or FAS mark wheelbase and axle-configuration variants; since launch DAF has also offered the XD with a fully electric drivetrain.

Read on 3 more paragraphs

The register lists 60 versions with 189 to 330 kW from six-cylinder engines of 6,690 to 12,902 cm³, unladen weights of 7,245 to 27,086 kg, gross vehicle weights of 19,000 to 49,000 kg, lengths of 6,080 to 12,310 mm and widths of 2,530 to 2,600 mm.

The XD serves the European segment between distribution traffic and medium-heavy construction and municipal use, often fitted with tipper, crane or refuse-compactor bodies; its main rivals are the Mercedes-Benz Arocs/Atego, Volvo FE/FM, Scania P/G series and MAN TGM/TGS, against which DAF positions itself mainly through the Paccar MX engine family and low running costs.

When buying used, check the AdBlue system and particulate filter on the Paccar MX engines, frame and body mounting after years of construction or municipal duty, wear on the air suspension, and battery condition and charge cycles on the electric versions; parts run through the DAF dealer network.

Sources: Kennwerte der Modelle DAF XD, DAF Trucks

Technical data

Engine

Power220 kWcorrect
Cylinders6correct
Displacement10,837 cm³correct

Dimensions and weights

Length11,560 mmcorrect
Width2,600 mmcorrect
Wheelbase6,100 mmcorrect
Unladen weight14,233 kgcorrect
Gross vehicle weight20,500 kgcorrect

Drivetrain and chassis

Gears12correct
Wheels6correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 15.5 kW/t (220 kW / 14.2 t)

Stronger than 33% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the DAF XD 300 FA have?

The DAF XD 300 FA delivers 220 kW.

How much does the DAF XD 300 FA weigh?

The unladen weight is 14,233 kg.

What is the gross vehicle weight of the DAF XD 300 FA?

20,500 kg.

What engine does the DAF XD 300 FA have?

6 cylinders, 10,837 cm³ displacement.

How fast does the DAF XD 300 FA go?

Top speed is 90 km/h.

What are the dimensions of the DAF XD 300 FA?

11,560 mm × 2,600 mm.

When was the DAF XD 300 FA built?

Production years: 2022-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare