Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks over 7.5 t › DAF › FT XF105

DAF FT XF105

Built: 2006-2014 · Series: FT

More machines from model year 2006

Wikimedia Commons · CC0 · Alf van Beem · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DAF FT XF105 is a model in the FT series. Production: 2006-2014. The engine delivers 340 kW, has 6 cylinders, with a displacement of 12,902 cm³. The machine is 6,030 mm long and 2,550 mm wide. The unladen weight is 7,434 kg. The wheelbase measures 3,800 mm. Top speed is 90 km/h. The gross vehicle weight is 19,000 kg. The machine runs on 4 wheels. The FT series covers 105 models. Rated output within it ranges from 265 to 340 kW; the FT XF105 sits at the top of that range with 340 kW. Its immediate neighbours are the FT 95.430W-A/380 below it with 315 kW. Unladen weight within it ranges from 7,075 to 10,960 kg; here the FT XF105 sits at the bottom of that range with 7,434 kg. 3352 DAF models across 109 series are on record.

DAF FT – the tractor-unit designation: F range from the 2100 to the 95 XF with the T suffix for Trekker, DKS/DKTD and later DAF engines, 265 to 340 kW, for long-haul work with a semi-trailer

At DAF, the letter F denotes the classic angular cab family of the 1970s to 1990s, and the T suffix stands for Trekker – that is, the tractor unit for operation with a semi-trailer, as distinct from the A versions as a flatbed or box chassis. The model plates in the register range from the early FT 1600 and FT 2000 through the FT 2600/2800/3300 with DKA/DKS/DKX engines to the FT 95 and FT 95 XF of the 1990s with additional digits for cab and power; the letters D, H, K, S and U after the type number denote cab size and equipment.

Read on 3 more paragraphs

The register lists 105 versions here with engines from 265 to 340 kW from 6,099 to 14,016 cm³ displacement with 6 cylinders, kerb weights from 4,612 to 12,815 kg, gross weights from 11,990 to 26,500 kg, lengths from 5,050 to 8,550 mm and widths from 2,200 to 2,550 mm.

As tractor units, the FT types formed the backbone of DAF's long-haul programme for two decades, before the CF and XF ranges with a new type logic took over.

On these older DAF tractor units, what counts is frame and cab rust, the condition of the clutch and manual gearbox, the fifth wheel coupling and its wear, the cooling system and injection pump of the inline engines, and spare parts supply, which on the oldest model years increasingly runs only through specialists and vintage-DAF enthusiast clubs.

Sources: Kennwerte der Modelle DAF FT, DAF Trucks (Hersteller)

Technical data

Engine

Power340 kWcorrect
Cylinders6correct
Displacement12,902 cm³correct

Dimensions and weights

Length6,030 mmcorrect
Width2,550 mmcorrect
Wheelbase3,800 mmcorrect
Unladen weight7,434 kgcorrect
Gross vehicle weight19,000 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 45.7 kW/t (340 kW / 7.4 t)

Stronger than 72% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the DAF FT XF105 have?

The DAF FT XF105 delivers 340 kW.

How much does the DAF FT XF105 weigh?

The unladen weight is 7,434 kg.

What is the gross vehicle weight of the DAF FT XF105?

19,000 kg.

What engine does the DAF FT XF105 have?

6 cylinders, 12,902 cm³ displacement.

How fast does the DAF FT XF105 go?

Top speed is 90 km/h.

What are the dimensions of the DAF FT XF105?

6,030 mm × 2,550 mm.

When was the DAF FT XF105 built?

Production years: 2006-2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare