D & S M1061A1
Built: 1989-1989 · Series: Other models
More machines from model year 1989
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
D & S – other models: flatbed trailers to the US military M1061A1 pattern, EU class O3 gross weights of 7,188 to 7,196 kg, unladen weights of 2,500 to 2,660 kg, widths of 2.44 to 2.45 m
This page gathers the D & S trailers the register could not assign to a named range. The type designation M1061A1 refers to the US military pattern of a four-wheel platform trailer with a 5-ton payload, designed as a flatbed trailer for generators, tanks and equipment; the models fall into EU vehicle class O3 for trailers with a gross weight of 3.5 to 10 t.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 2,500 to 2,660 kg, gross weights from 7,188 to 7,196 kg, lengths from 5,550 to 5,600 mm and widths from 2,440 to 2,450 mm.
Trailers of this pattern come from military surplus and are reused in civilian service, for instance in construction, as trailers for agricultural machinery and equipment, or in fire-brigade and civil-protection kit, where the rugged steel construction and low loading height are valued. The versions listed on this page show the range in which the maker operates outside its named model ranges.
On used trailers, frame and axle condition, the braking system (air-over-hydraulic), the tow eye and support legs, rust on the steel platform and the load capacity of the sides count; parts for this pattern run through military-vehicle specialists.
Technical data
Dimensions and weights
| Length | 5,600 mmcorrect |
|---|---|
| Width | 2,440 mmcorrect |
| Wheelbase | 1,250 mmcorrect |
| Unladen weight | 2,500 kgcorrect |
| Gross vehicle weight | 7,188 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the D & S M1061A1 weigh?
The unladen weight is 2,500 kg.
What is the gross vehicle weight of the D & S M1061A1?
7,188 kg.
Up to what speed is the D & S M1061A1 approved?
Approved up to 100 km/h.
What are the dimensions of the D & S M1061A1?
5,600 mm × 2,440 mm.
When was the D & S M1061A1 built?
Production years: 1989.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.