Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Crompton Greaves › ND280S-75D2

Crompton Greaves ND280S-75D2

Series: Other models

The photo shows the 18.5KZ2_MEPS from the same series. Source: https://www.crompton.co.in/products/mik22-18

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Crompton Greaves ND280S-75D2 is a three-phase induction motor built by Crompton Greaves. The rated output is 75 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 280 S in foot-mounted form. The protection class is IP55. The efficiency is 94.6 per cent at full load, 94.6 per cent at 75 per cent load and 92.6 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in India. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to AS/NZS 1359.102.3:2000. Rated output across the Crompton Greaves range ranges from 0.75 to 180 kW; the ND280S-75D2 sits in the middle of that range with 75 kW. Its immediate neighbours are the ND250M-55D4 below it with 55 kW and the 90KZ2_MEPS above it with 90 kW. 124 Crompton Greaves models are on record.

Crompton Greaves – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 180 kW, 2- to 8-pole, Indian manufacture, efficiencies up to 95.72%

This page gathers the three-phase motors registered under the Crompton Greaves brand in the Australian GEMS/MEPS register that could not be assigned to a named range. Crompton Greaves is a long-established Indian electrical engineering group headquartered in Mumbai; following the company's demerger, the industrial motor business continues today under a new name. All 124 models recorded here come from Indian manufacture. The type codes consist of a power rating, a range abbreviation (KG or KZ) and pole count, for example 0.75KG2_MEPS or 11KZ4_MEPS; the suffix "_MEPS" is clearly a tag appended by the register itself, not part of the manufacturer's actual designation.

Read on 3 more paragraphs

The register lists here 124 versions from 0.75 to 180 kW, 2- to 8-pole, with efficiencies from 73.5 to 95.72% at full load and 73.5 to 95.82% at 75% load, and protection classes mostly between IP55 and IP66. Frame sizes are not recorded in the register as a continuous span but as individual IEC foot-mounted designs from 90 L to 200 L. No GEMS "High Efficiency Level" classification is recorded for any of the 124 models.

Crompton Greaves is one of the established electric motor manufacturers in the Indian market, with an upper power limit of 180 kW that is unusually high for this part of the register; the models gathered here represent the range outside the separately maintained series.

For used Crompton Greaves motors, the usual checkpoints apply: measure the winding's insulation resistance, check the bearings for running noise and play, check the shaft turns freely, assess the condition of the fan and fan cowl, and match frame size, pole count, protection class and efficiency class on the rating plate against the intended application. For inverter operation, check separately whether the winding insulation and bearings are rated for it, since the register provides no data on this.

Sources: Kennwerte der Modelle Crompton Greaves (weitere Modelle)

Technical data

Engine

Rated output75 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size280 S (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load94.6 %correct
Efficiency at 75 % load94.6 %correct
Efficiency at half load92.6 %correct

Origin and approval

Country of manufactureIndiacorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the Crompton Greaves ND280S-75D2 have?

The Crompton Greaves ND280S-75D2 delivers 75 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare