Start › Electric motors › CMG › PPC250M

CMG PPC250M

Series: Other models

The photo shows the HPD80B-2 from the same series. Source: https://reviewmotors.co/cmg-electric-motor-spare-parts/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

CMG lists the PPC250M as a three-phase induction motor. The rated output is 30 kW. The motor is eight-pole, which at 50 Hz gives a synchronous speed of 750 rpm. The rated voltage is 415 V. The housing is frame size 250 S in foot-mounted form. The protection class is IP66. The efficiency is 92.3 per cent at full load, 91.8 per cent at 75 per cent load and 90.1 per cent at half load. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to AS 1359.102.1:1997. Rated output across the CMG range ranges from 0.75 to 160 kW; the PPC250M sits in the lower part of that range with 30 kW. Its immediate neighbours are the XPA200LB-6 below it with 22 kW and the HGA200LB-2 above it with 37 kW. 815 CMG models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output30 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles8correct
Protection class66correct
Frame size250 S (foot)correct
Mounting (IEC 60034-7)IM1001, 1011, 1031, 1051, 1061, 1071, 3001, 3011, 3031, 2001, 2011, 2031correct
Efficiency at full load92.3 %correct
Efficiency at 75 % load91.8 %correct
Efficiency at half load90.1 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the CMG PPC250M have?

The CMG PPC250M delivers 30 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CW32075

CW32110

CW32150

CW32220

CW34075

CW34110

CW34150

CW34190

CW34220

CW34220E

CW36075

CWC3538K

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare