Start › Electric motors › CMG › PPA80C-2

CMG PPA80C-2

Series: Other models

The photo shows the HGM160MB-2 from the same series. Source: https://storage.googleapis.com/dcddrylhpctfxe/electric-motor

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CMG PPA80C-2 is a three-phase induction motor from the CMG range. The rated output is 1.1 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 80 M in foot-mounted form. The protection class is IP66. The efficiency is 83.8 per cent at full load, 84.2 per cent at 75 per cent load and 82.4 per cent at half load. At full load it delivers 3.6 Nm. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2019; measured to AS 1359.102.1:1997. Rated output across the CMG range ranges from 0.75 to 160 kW; the PPA80C-2 sits at the bottom of that range with 1.1 kW. Its immediate neighbours are the CWTC3905E below it with 0.93 kW and the CWC3888B above it with 1.2 kW. 815 CMG models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output1.1 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP66correct
Frame size80 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B14, B34, B34, B35, V1, V3, V5, V6, V18, V19correct
Efficiency at full load83.8 %correct
Efficiency at 75 % load84.2 %correct
Efficiency at half load82.4 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the CMG PPA80C-2 have?

The CMG PPA80C-2 delivers 1.1 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CW32075

CW32110

CW32150

CW32220

CW34075

CW34110

CW34150

CW34190

CW34220

CW34220E

CW36075

CWC3538K

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare