CMG PPA100LB-4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CMG – other models: the collective page of MEPS-registered three-phase motors from the Australian supplier outside the named ranges, frame sizes 80 to 355, 0.75 to 160 kW, 2- to 8-pole
This page gathers the CMG three-phase motors the Australian energy-efficiency register could not assign to a named range. CMG is an Australian industrial-motor business that sells three-phase motors and drive technology for the Australian market; according to the register entries, manufacturing lies mainly in China. Recognisable range names appear in the motor-family field with the codes HGA, HGM, HPD and XGA, which presumably denote different frame or housing classes within the standard-motor range; the exact meaning of the letters cannot be reliably confirmed from the dump.
Read on 3 more paragraphs
The register lists here 719 versions with 0.75 to 160 kW, two- to eight-pole, full-load efficiencies from 72 to 96.8% and at 75% load from 70.4 to 96.7%. Protection is mainly IP55 and IP66, frame sizes run from 80 to 355. China (643), Australia (47), Germany (11), Chile (9), Thailand (5) and the Cocos Islands (2) are recorded as manufacturing countries. Testing mostly followed the 2012 (449) and 2019 (167) GEMS determinations and AS/NZS 1359.5, with test method B for the large majority; of all 719 motors, 189 reach the 2005 High Efficiency Level (roughly IE2), the remaining 530 stay unclassified.
CMG positions itself in the Australian market as a value alternative to the big international brands such as ABB, Siemens or WEG, with a broad range of IEC standard motors for pumps, fans, conveyors and general drive tasks.
When buying used, bearing condition and a checked insulation resistance of the winding, the visible condition of the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency class matter (only about a quarter of the models even carry a High Efficiency classification); anyone wanting to run the motor on a variable-speed drive should check its suitability beforehand. Spares run through CMG's Australian distribution.
Sources: Kennwerte der Modelle CMG (weitere Modelle, MEPS-Registrierungen)
Technical data
Engine
| Rated output | 3 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP66correct |
| Frame size | 100 L (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B6, B7, B8, B14, B34, B34, B35, V1, V3, V5, V6, V18, V19correct |
| Efficiency at full load | 87.6 %correct |
| Efficiency at 75 % load | 87.6 %correct |
| Efficiency at half load | 85.9 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
|---|---|
| Test method | AS 1359.102.1:1997correct |
Frequently asked questions
How much power does the CMG PPA100LB-4 have?
The CMG PPA100LB-4 delivers 3 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.