StartElectric motorsCMG › HGA160L-4

CMG HGA160L-4

Series: Other models

The photo shows the XPA160L-4 from the same series. Source: https://storage.googleapis.com/dcddrylhpctfxe/electric-motor

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

CMG lists the HGA160L-4 as a three-phase induction motor. The rated output is 15 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 160 L in foot-mounted form. The protection class is IP55. The efficiency is 92 per cent at full load, 92 per cent at 75 per cent load and 91 per cent at half load. The motor weighs 148 kg. At full load it delivers 98.7 Nm. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to AS 1359.102.1:1997. Rated output across the CMG range ranges from 0.75 to 160 kW; the HGA160L-4 sits at the bottom of that range with 15 kW. Its immediate neighbours are the XPA160MA-2 below it with 11 kW and the Aluminium Frame HLA160L-2 above it with 18.5 kW. 815 CMG models are on record. The model is listed under Electric motors. 27 verified figures from 1 source are on file.

Technical data

Engine

Engine familyHGAcorrect
Engine familiesHGAcorrect
Rated output15 kWcorrect

Dimensions and weights

Weight148 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size160 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B14, V1, V3, V5, V6, V18, V19correct
Efficiency at full load92 %correct
Efficiency at 75 % load92 %correct
Efficiency at half load91 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the CMG HGA160L-4 have?

The CMG HGA160L-4 delivers 15 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare