Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › SCORPION 746

CLAAS SCORPION 746

Built: 2021-2023 · Series: SCORPION

More machines from model year 2021

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS SCORPION 746 is a model in the SCORPION series. Production: 2021-2023. The engine delivers 100 kW, has 4 cylinders, with a displacement of 3,621 cm³. The machine is 5,656 mm long and 2,549 mm wide. The unladen weight is 8,400 kg. The gross vehicle weight is 12,000 kg. The SCORPION series covers 16 models. Rated output within it ranges from 100 to 115 kW; the SCORPION 746 sits at the bottom of that range with 100 kW. Its immediate neighbours are the Scorpion 742 above it with 105 kW. Unladen weight within it ranges from 6,800 to 10,800 kg; here the SCORPION 746 sits in the middle of that range with 8,400 kg. 856 CLAAS models across 54 series are on record.

CLAAS Scorpion – Farm Telehandler: Concept, Power Class, Drivetrain, 100 to 115 kW and Operating Weight from 6,800 to 10,800 kg

The Scorpion is CLAAS's telehandler series for agricultural use, covering tasks such as loading and unloading bales, silage or bulk materials around the farmyard and livestock buildings. According to the register, output of the recorded models ranges from 100 to 115 kW, powered by four-cylinder engines with displacement from 3,621 to 4,038 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 6,800 to 10,800 kg, placing the series in the mid-to-upper weight segment of agricultural telehandlers. Models carrying the VariPower designation in the CLAAS range indicate versions with stepless travel drive, while base variants were delivered with a different type of drivetrain.

CLAAS positions the Scorpion as a complement to its tractor and harvesting machinery range, for farms that prefer a dedicated telehandler over a tractor-mounted front loader for yard work. Buyers of a used machine should check boom wear, hydraulic condition and drivetrain variant, since resale value depends heavily on how intensively the machine was used.

Telehandlers such as the Scorpion work with a single telescopic boom rather than the combined pivot-and-telescope arm typical of backhoe loaders, which gives them considerable lift height in a comparatively compact design. Unlike on a classic tractor, the power take-off is not central on a telehandler; what matters instead is hydraulic capacity and the range of attachments such as buckets, bale grabs or pallet forks.

Sources: Kennwerte der Modelle CLAAS Scorpion, CLAAS

Technical data

Engine

Power100 kWcorrect
Cylinders4correct
Displacement3,621 cm³correct

Dimensions and weights

Length5,656 mmcorrect
Width2,549 mmcorrect
Unladen weight8,400 kgcorrect
Gross vehicle weight12,000 kgcorrect

Where this model stands

Power-to-weight ratio: 11.9 kW/t (100 kW / 8.4 t)

Power class: Large (100–180 hp)

Stronger than 80% of the tractors in the register — out of 15,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS SCORPION 746 have?

The CLAAS SCORPION 746 delivers 100 kW.

How much does the CLAAS SCORPION 746 weigh?

The unladen weight is 8,400 kg.

What is the gross vehicle weight of the CLAAS SCORPION 746?

12,000 kg.

What engine does the CLAAS SCORPION 746 have?

4 cylinders, 3,621 cm³ displacement.

What are the dimensions of the CLAAS SCORPION 746?

5,656 mm × 2,549 mm.

When was the CLAAS SCORPION 746 built?

Production years: 2021-2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare