StartHarvesting machineryCLAAS › Mega 350

CLAAS Mega 350

Series: Claas Combine

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Claas Combine series from CLAAS includes the Mega 350. The engine has 6 cylinders, with a displacement of 6,400.8 cm³. Rated speed is 2,200 rpm. The tank holds 400.1 litres. The engine fitted is the OM 906 LA. 541 CLAAS models across 24 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 1 source are on file.

Technical data

Engine

Engine modelOM 906 LAcorrect
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,400.8 cm³correct

Working data

Fuel tank capacity400.1 lcorrect

Frequently asked questions

What engine does the CLAAS Mega 350 have?

6 cylinders, 6,401 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare