Citroën Camionnette
Built: 1954-1954 · Series: Other models
More machines from model year 1954
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Citroën – other models: the collective page for transporters outside the named series, from the AK and HY family to the early camionnette, 600 to 1,940 cc, two to four cylinders
Citroën was founded in Paris in 1919 and today belongs to the Stellantis group. This page gathers transporters outside the named series: derivatives of the 2CV family such as the AK350 and the AZU-E, the HY built on the same platform with its characteristic corrugated steel panels, produced from 1947 to 1981, and early box vans recorded under the French term camionnette. The HY was one of the first mass-produced front-wheel-drive vans, and its self-supporting body of simple, cheaply pressed steel folds shaped Citroën's commercial-vehicle development for decades.
Read on 3 more paragraphs
The register lists eight versions with 600 to 1,940 cc of displacement across two to four cylinders and kerb weights from 628 to 1,951 kg; lengths range from 4,260 to 6,070 mm at a width of 1,480 to 1,990 mm, and one version is recorded at 37 kW.
With the HY and its 2CV-based siblings, Citroën took the French segment of simple, cheap-to-run vans for trade and commerce, competing against Renault's Estafette and Peugeot's light transporters. Their rugged, easily repaired engineering kept these vehicles in everyday use well into the 1980s.
For a used purchase, the condition of the self-supporting steel body matters most, since rust on wheel arches, sills and floor pans is common on cars of this age; the air-cooled twin-cylinder boxer engines and the hydropneumatic components of the later versions are mechanically robust but need regular servicing. Parts for the 2CV family are well supplied through the European classic-car market.
Sources: Kennwerte der Modelle Citroën (weitere Modelle), Citroën
Technical data
Engine
| Power | 37 kWcorrect |
|---|
Dimensions and weights
| Length | 4,260 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Unladen weight | 1,350 kgcorrect |
Drivetrain and chassis
| Gears | 3correct |
|---|
Where this model stands
Power-to-weight ratio: 27.4 kW/t (37 kW / 1.4 t)
Stronger than 2% of the vans in the register — out of 7,145 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Citroën Camionnette have?
The Citroën Camionnette delivers 37 kW.
How much does the Citroën Camionnette weigh?
The unladen weight is 1,350 kg.
What are the dimensions of the Citroën Camionnette?
4,260 mm × 1,990 mm.
When was the Citroën Camionnette built?
Production years: 1954.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.