Citroën 12 L2H1 HDI 90 FAP DC
Built: 2012-2012 · Series: Jumpy
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Citroën Jumpy – from the Sevelnord compact van to a modern light commercial: three generations since 1994, built alongside the Peugeot Expert and Fiat Scudo, 1.6 to 2.0-litre HDi diesels, 51 to 130 kW
The Citroën Jumpy emerged in 1994 from the Sevel Nord cooperation between PSA (Citroën, Peugeot) and Fiat and is still built at the Valenciennes-Hordain plant in northern France, identical in construction to the Peugeot Expert and – until the alliance ended – the Fiat Scudo. The model plates in the register show the development across three generations: L1/L2 for short and long wheelbase, H1/H2 for roof height, DC for the double cab, the HDi and BlueHDi codes for the diesel injection along with power in kW or PS.
Read on 3 more paragraphs
The register lists 97 versions here with engines from 51 to 130 kW from 1,560 to 1,997 cm³ displacement, kerb weights from 1,310 to 2,470 kg and gross weights from 1,825 to 3,100 kg; lengths are recorded for only part of the models.
Alongside the VW Transporter and Renault Trafic, the Jumpy is one of the established compact vans in the one-tonne segment and is sold both as a panel van for trades and deliveries and – under the SpaceTourer name – as a passenger vehicle.
On HDi engines, what counts is the turbocharger, dual-mass flywheel and injectors; on panel vans, rust on the sliding door tracks and load floor, the condition of the clutch and gearbox, and – on common-rail engines with a particulate filter – its condition; spare parts are widely available through the PSA network and the independent parts trade.
Sources: Kennwerte der Modelle Citroën Jumpy, Citroën (Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,560 cm³correct |
Dimensions and weights
| Width | 1,900 mmcorrect |
|---|---|
| Wheelbase | 3,120 mmcorrect |
| Unladen weight | 1,855 kgcorrect |
| Gross vehicle weight | 2,880 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Citroën 12 L2H1 HDI 90 FAP DC weigh?
The unladen weight is 1,855 kg.
What is the gross vehicle weight of the Citroën 12 L2H1 HDI 90 FAP DC?
2,880 kg.
What engine does the Citroën 12 L2H1 HDI 90 FAP DC have?
4 cylinders, 1,560 cm³ displacement.
When was the Citroën 12 L2H1 HDI 90 FAP DC built?
Production years: 2012.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1.9 TD W3
1.9D 500 W3
1.9D 800 / 500
1.9D 800 LANG
1.9D 800 LANG DC
1.9D DC LANG
1.9D LANG
1.9D W3
1.9TD
1.9TD 500 W3
1.9TD DC LANG
1.9TD DHX W3
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.