Start › Harvesting machinery › Chery › 8000A

Chery 8000A

Built: 2014-2014 · Series: Other models

Source: https://www.agrarheute.com/technik/maehdrescher-ruedenroder-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 8000A comes from Chery. Production: 2014. The engine delivers 158 hp (118 kW). The model was built in Wuhu, Anhui, China. The fuel is diesel. It was succeeded by the Detank 8000A. Rated output across the Chery range ranges from 25 to 300 hp; the 8000A sits in the middle of that range with 158 hp. Its immediate neighbours are the 4LZ-5B below it with 123 hp and the RV1654 above it with 165 hp. 18 Chery models across 2 series are on record. The model is listed under Harvesting machinery. 7 verified figures from 1 source are on file.

Technical data

Engine

Fuel	dieselcorrect
Power	158 hp (118 kW)correct

Origin and approval

Plant	Wuhu, Anhui, Chinacorrect
Successor	Detank 8000Acorrect

Frequently asked questions

How much power does the Chery 8000A have?

The Chery 8000A delivers 158 hp.

When was the Chery 8000A built?

Production years: 2014.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →